The XW60L (outer dimension is 38x185 mm) controller is suitable for medium or low temperature forced air cooling Microcomputer controller for refrigeration system. 4 relay outputs control compressor, evaporation respectively fan, electric defrost (or hot air defrost), lights (configurable). it can The built-in real-time clock (RTC) can be used for cycle defrost control up to 6 times a day, and also Work can be divided into two situations: holidays and working days. "day and night" can be Different set points, this function is suitable for energy saving operation when day and night electricity charges are different. Two NTC or PTC sensor inputs (first and second temperature probe), first Used to control the room temperature, the second circuit can be placed on the evaporator to control the defrost termination temperature and wind The fan's evaporator start-stop temperature. One of the two digital inputs can be defined as the third temperature Degree probe (the third probe, which needs to be specified when ordering). The fourth temperature probe can be used to measure to measure the condensation temperature (alarm) or to measure and display the temperature at a point (the fourth probe, A connector is required, which needs to be ordered separately. The model is: NG6-K. Users can also customize match). The parameter list can be uploaded or downloaded through the programming key (Hot Key) interface. in this interface By using the external communication converter XJ485CX to convert to ModBUS-RTU protocol, it can be to access the network of DIXELL's XWEB series monitoring system. The controller provides a full-featured configurable parameter table system that the user can press through the keyboard. button for easy programming.