Donaldson Filter P553500

06/29/2020

How the compressor works

08/15/2020

Illustrate the working principle and characteristics of various heat exchangers

1. Heat exchanger<br></br> 1. U-shaped tube heat exchanger<br></br> Each tube is bent into a U shape and fixed on the same side tube plate. Each tube can be freely expanded and contracted, also in order to eliminate thermal stress.

06/30/2020

What are the causes of compressor overheating

What are the causes of compressor overheating Some causes of compressor overheating: high return air temperature, large motor heating capacity, high compression ratio, high condensing pressure, and improper refrigerant selection.

10/01/2025

Danfoss expert analysis! Causes and troubleshooting of compressor start-up with liquid

Identify the authenticity of Danfoss compressors, solenoid valves, expansion valves, and filters Danfoss T2 valve true and false comparison:

09/11/2020

Several Improvements on the Easy Failure Points of Air Compressor

The original compressor has poor cooling effect and low efficiency. The improvement method is to introduce the water that enters the primary and secondary cylinders and the intercooler directly from the main pipe to the water collecting funnel after cooling.

09/18/2020

Jingliang Electronics-Air Compressor Sensor Solution

——High-quality, cost-effective to provide customers with perfect sensor solutions Precision Electronics-MEAS (MSI) Sensor Co., Ltd. is a precision electronic engineering expert who masters the world's leading silicon micromachining MEMS technology.

09/08/2020

Is air compressor lubricating oil the more viscous the better

Air compressor lubricating oil has many functions and effects such as cooling, sealing, lubrication, etc. It is a necessity during the use of air compressors. The good lubrication effect can not only give full play to the overall efficiency of the air compressor unit in operation, improve the efficiency of the equipment, but also reduce the failure rate and reduce the maintenance cost.

03/11/2021

The main circuit fuse fusing is a common fault of SCR servo driver. The causes of fuse fusing are as follows

The "phase sequence" of power incoming line is incorrect. Due to the synchronization problem between the trigger pulse and the main circuit of SCR servo driver, there are strict requirements on the "phase sequence" of the input power supply. If the "phase sequence" is not correct, connecting the power supply may immediately cause the fuse of the main circuit of the driver to blow.

07/10/2020

Hitachi

Hitachi original place：Japan Brand introduction: Hitachi was established in 1910. In the industry, it is a diversified enterprise integrating household appliances, computer products, semiconductors, industrial machinery and other products.

08/13/2024

16 Common Faults and Troubleshooting Methods of Cold Storage Refrigeration Equipment

[Fault analysis] After the refrigerant leaks in the system, the cooling capacity is insufficient, the suction and discharge pressures are low, and a much larger intermittent "squeaking" airflow sound can be heard at the expansion valve than usual.