Ebmpapst Fan W1G 200-HH01-52

08/15/2020

Precautions for operation of cold storage evaporator

Cold storage evaporators can be divided into two categories: air coolers and cooling pipes. Air coolers are generally used in cooling rooms, freezing rooms and cooling reduction rooms for cooling objects.

08/05/2020

Why does the heating system lose water

1. Why does the compressor produce overheat protection? The working principle and classification of the overload protector. The overload protector of the compressor for air conditioning generally adopts a snap-type bimetallic protector,When the pipeline is filled with water, a large amount of dissolved oxygen is mixed into it to cause corrosion; the insulation shell of the directly buried pipeline is disconnected and is subject to long-term soaking of groundwater to cause corrosion.

09/22/2020

Discussion on Calculation Method of Surge Line of Rich Gas Compressor

1 Introduction The catalytic cracking rich gas compressor is a kind of compressor, which is very representative. For this reason, the catalytic cracking rich gas compressor is taken as an example to discuss the calculation method of the surge line of the rich gas compressor control system.

08/11/2020

Precautions for compound evaporative cooling system in air conditioner

The composite evaporative cooling system is a composite system that organically combines the evaporative cooling device and the compression refrigeration and air conditioning system, and is

08/08/2020

What are the cold storage boards and how to buy them

What are the cold storage boards and how to buy them What are the cold storage boards? How do I know which specifications and models of cold storage boards are needed for the cold storage I build?

06/14/2020

What are the possible reasons for the noise of the air-conditioning compressor

     Compressor noise control is an extremely complex problem. What are the possible reasons for the noise of air-conditioning compressors? Only when the cause is found can the solution be found accordingly.

08/02/2020

What to do when the cold storage is cooled for the first time

Before the cold storage is put into production, the installation and debugging of the low-temperature cold storage is a very important content. Only by debugging the temperature can the temperature in the cold storage be reduced to the temperature you need,

07/23/2020

How to reduce the discharge temperature of refrigeration compressor

The refrigeration compressor is the core and heart of the refrigeration system. The capacity and characteristics of the compressor lead to the capacity and characteristics of the refrigeration system. In a sense, the design and matching of the refrigeration system is to reflect the capacity of the compressor.

08/13/2020

How to replace the lubricating oil and filter drier of the chiller

After the chiller is used for a long time, the lubricating oil will inevitably be contaminated or acidified. Therefore, we must pay attention to the change of oil quality during the operation of the unit.

06/29/2020

Suggestions for troubleshooting of compressor with liquid start