ELCO Encoder EAC58C10-GP6PPDR-1024

08/12/2024

21 FAQs on Refrigeration Compressors (Part 2)

When the refrigeration compressor starts, a little refrigeration oil will enter the air conditioning system with the refrigerant circulation.

08/15/2020

Precautions for the installation of refrigeration equipment

For large enterprises that need to use refrigeration equipment, due to the larger scale of the enterprise, the demand for refrigeration will also be greater. Therefore, when selecting and installing refrigeration equipment

07/16/2020

Why should the high and low temperature test chamber be debugged and calibrated?

In order for the high and low temperature test chamber to exert its maximum efficiency and stability in the hands of customers, the most important thing is to debug and calibrate the factory during the 15-day forward behavior period. The following are the three methods for calibrating the high and low temperature test chamber and their The advantages and disadvantages of

06/29/2020

Several causes of compressor burning

06/10/2024

Hydraulic System Components, Working Principle, Pros＆Cons, Application, with Diagrams

Hydraulic systems are widely used. Why do we use them? What is the working principle of them?

07/22/2020

The adjustment principle of the screw compressor slide valve is actually very simple!

Today, I will tell you about the maintenance example of the poor cooling effect of the air conditioner.<br></br> <br></br> 1. The cooling is poor, and the operating frequency is not up to the highest. The exhaust pipe overheating code will be displayed for about 20 minutes.<br></br>

08/31/2020

Detection and evaluation of dust removal and nitrogen addition equipment in the food processing field

In the Midwestern United States, most food manufacturing plants use compressed air and on-site nitrogen production to produce and package a variety of foods. When the electricity price is 4.5 cents/KWh, the manufacturer's annual expenditure on the energy consumption of the compressed air system is $430,344.

03/08/2021

AC servo driver wiring precautions

For signal line and encoder input line, please use shielded wire. Wiring length: the length of signal line from NC to AC servo driver is less than 3m, and the length of input line from AC driver to encoder is less than 20m. The ground wire should be thick wire as far as possible. According to the third grounding standard (grounding resistance < 100 Ω), one point grounding method should be adopted to connect the ground wire. If the motor and the machine tool are insulated, the motor should be grounded.

07/29/2020

Causes of air-conditioning noise and treatment methods

Definition of noise:<br></br> 　　1. The definition of noise: From the perspective of physiology and psychology, it refers to all the sounds that people don't need. From an industrial point of view, the sounds emitted by products are noise.

10/05/2023

Freeze Drying vs Dehydration: Is a Freeze Dryer and a Dehydrator the Same Thing

When it comes to preserving food, there are a variety of methods that can be used. Two of the most common methods are freeze-drying and dehydrating.