Shaft diameter (max):15 mm
Resolution (max):24,000 ppr
Output frequency (max):500 kHz
Operating temperature (Celsius degree):-20...+70
Enclosure rating:IP 66
Eltra Encoder EL63F250S5/28P12X3MR
People who bought this item also viewed
HONTKO Encoder HSK-100-2
Renishaw Encoder TI0200A20A
Metronix Encoder H40-8-0100ZT
MitsubishiServo DriveMR-J3-20B1
Customers frequently viewed
IWAYA DENKI Water Pump 25CJT0752
Panasonic Servo Motor MHMF022L1V2M
Honeywell Solenoid Valve VE4025B1045
ROTEN Mechanical Seal 8E5K-22-X
SANDSUN Overload Pump VA08H-760
GS Battery 6-QW-60(450)-(55D23L-KR)
Rechi Compressor 44R273A
MINDMAN Air Cylinder MCQV2-11-40-200
Mitsubishi Compressor YB645WTG
AirTAC Air Cylinder HLS25X900S
Honeywell Sensor 19C100PA1L
Recent related posts
-
10/13/2021
Common Types of Refrigeration Compressors: A Comprehensive Guide
When mentioning refrigeration, everyone in this modern world may be familiar with it. People's daily use of air conditioners, refrigerators, whether small household or large commercial ones, are refrigeration appliances.
-
09/11/2020
Thrust bearings
Thrust bearing: Rolling bearing mainly used for bearing axial load, its nominal contact angle is 45-90 degrees. According to the difference of nominal contact angle, it is divided into:
-
10/16/2020
What is the cause of insufficient displacement of Copeland compressor
Insufficient compressor displacement has a great impact on the entire refrigeration system. If it is not repaired and handled in time, it may cause problems such as the cylinder, cylinder head rupture, and compressor water intake, which will destroy the entire refrigeration system cycle. It may even cause accidents such as compressor combustion and explosion. So what causes the insufficient displacement of Copeland compressor? Let's take a look.
-
08/20/2020
Cold storage anti-corrosion and anti-frost coatings effectively solve the problem of frosting and corrosion
In the cold storage, when the dew point of the air is lowered by the cooling pipe surface, the moisture in the food and air will precipitate and condense on the pipe wall. If the pipe wall temperature is lower than 0°C, it will condense into a rain layer.
-
03/17/2021
Several common faults in the spindle drive system of CNC machine tools and how to repair it?
When the vertical machining center supporting FANUC6 system is working, the machine tool vibrated severely, and the AC spindle drive displayed AL-04 alarm. During the vertical machining center supporting FANUC6 system is working, the machine tool vibrates severely, and the AC spindle drive displays AL-04 alarm.
-
06/14/2020
Compressor failure of central air conditioning maintenance
The compressor as the core component of the air conditioner is similar to the "heart". Its failure will affect the operation of the entire system. Let's take a look at the compressor failure of the central air conditioning maintenance:
-
02/07/2024
A Comprehensive Guide: How to Turn off Oven Cooling Fan
Oven cooling fans are designed to dissipate heat and maintain safe temperatures during or after cooking.
-
07/17/2022
How to Repair Gear Pump
In the previous article, we introduced a lot about the gear pump, so how to install the gear pump? Let's talk about it today.
-
06/21/2020
[Experience] What happens if the compressor suction pressure is too high and the discharge pressure is too high
[Experience] What happens if the compressor suction pressure is too high and the discharge pressure is too high Compressor suction pressure is too high, discharge pressure is too high 1. Too much refrigerant. Too much refrigerant will cause the suction pressure and discharge pressure to be too high at the same time. This is because when too much refrigerant fills the reservoir, it will occupy a part of the condenser volume, reducing the heat dissipation area and causing the condenser Poor condensation. Discharge excess refrigerant from the low-pressure side.
-
08/31/2020
Talking about the characteristics and main points of air compressor waste heat recovery
With the continuous improvement of the domestic economic level, the corresponding prices of various energy products continue to rise, and energy consumption is critical to the corresponding production and operation of related industrial enterprises.