Piston diameter: 125 mm
Type code: ADN
Based on norm: ISO 21287
Cushioning: Elastic cushioning rings/pads at both ends
Mounting position: Any
Design: Profile barrel: Piston: Piston rod
Position sensing: For proximity sensor
Variants: Continuous, hollow piston rod: Special thread on piston rod: Constant, slow movement: Explosion protection certification (ATEX): Through piston rod: Piston rod at one end: Laser etched rating plate: High corrosion protection: With anti-twist protection: Low friction: Extended piston rod: Heat-resistant seals max. 120Celsius Degree: Increased service life: Extended external thread piston rod
Operating pressure: 0.6 bar - 10 bar
Mode of operation: Double-acting
ATEX category gas: II 2G
Type of ignition protection for gas: c T4
ATEX category for dust: II 2D
Type of (ignition) protection for dust: c 120Celsius Degree
Explosive ambient temperature: -20Celsius Degree <= Ta <= +60Celsius Degree
Explosion prevention and protection: Zone 2 (ATEX): Zone 21 (ATEX): Zone 22 (ATEX): Zone 1 (ATEX)
Operating medium: Compressed air as per ISO 8573-1:2010 [7:4:4]
Information on operating and pilot media: Operation with oil lubrication possible (required for further use)
CE marking (see declaration of conformity): as per EU explosion protection directive (ATEX)
Corrosion resistance class (CRC): 2 - Moderate corrosion stress: 3 - High corrosion stress
Ambient temperature: -20 to 120 Celsius Degree
Theoretical force at 6 bar, retracting: 7069 N
Theoretical force at 6 bar, advancing: 7069 N - 7363 N
Moving mass at 0 mm stroke: 1080 g
Additional weight per 10 mm stroke: 117 g
Basic weight with 0 mm stroke: 2880 g
Additional moving mass per 10 mm stroke: 39 g
Type of mounting: With internal thread: With accessories: With through-hole: Optionally:
Pneumatic connection: G1/4
Note on materials: RoHS-compliant
Cover material: Anodized: Aluminum
Piston rod material: High-alloy steel
Material of cylinder barrel: Wrought aluminum alloy: Smooth anodized
Festo Air Cylinder ADN-125-25-I-P-A
People who bought this item also viewed
Compact Air Cylinder SD34X12
CKD Air Cylinder SCPG2-M-00-10-30
Festo Air Cylinder DGC-25-625-KF-PPV-A
MINDMAN Air Cylinder MCQV2-11-40-200
Festo Air Cylinder DGS-40-140-PPV
Festo Air Cylinder ADVU-63-75-A-P-A
Festo Air Cylinder ADVULQ-20-20-P-A
Festo Air Cylinder DGSL-10-40-Y3A
Festo Air Cylinder SLT-16-20-P-A
MINDMAN Air Cylinder MCJS-11-40-15M
Festo Air Cylinder DSBC-80-20-D3-PPVA-N3
Festo Air Cylinder DSNU-20-80-PPS-A
HENGSTLER Encoder RI58-D/1000AE.47TD
AirTac Solenoid Valve 2KS500-50-DC24V
Johnson Controls Actuator M9102-IGA-3S
Customers frequently viewed
IWAYA DENKI Water Pump 25CJT0752
Panasonic Servo Motor MHMF022L1V2M
Honeywell Solenoid Valve VE4025B1045
ROTEN Mechanical Seal 8E5K-22-X
SANDSUN Overload Pump VA08H-760
GS Battery 6-QW-60(450)-(55D23L-KR)
Rechi Compressor 44R273A
MINDMAN Air Cylinder MCQV2-11-40-200
Mitsubishi Compressor YB645WTG
SALECOM Switch T8013A
Belimo Actuator NFU24-SR
Recent related posts
-
07/15/2020
ZP725KCE-TWD60 HP 50Hz air conditioner Emerson Copeland compressor
Today's editor will introduce the Emerson Copeland compressor ZP725KCE-TWD, which is suitable for R410A refrigerant at 50Hz single-phase electric air conditioning. The power given in the manual of Emerson Copeland Scroll Air Conditioner Compressor is 60 hp. Other technical parameters can be downloaded from our company's website for inquiries.
-
06/27/2020
The sign of the normal operation of the refrigeration unit
The sign of the normal operation of the refrigeration unit 1. There is no knocking sound in the piston refrigeration compressor, the compressor is operating normally, the expansion valve opening is adjusted properly, and there is only compressor suction and exhaust sound during operation, and no knocking or other abnormal sounds are produced.
-
08/19/2020
Knowledge of two air conditioners the same and different between evaporator and condenser
Condenser and evaporator are heat exchangers, which are widely used in refrigeration systems of high and low temperature alternating damp heat test chambers, constant temperature and humidity test chambers and other equipment.
-
06/21/2020
Structure of rotary piston compressor_Characteristics of rotary piston compressor
Structure of rotary piston compressor_Characteristics of rotary piston compressor <img src="{{media url="Structure_of_rotary_piston_compressor_Characteristics_of_rotary_piston_compressor.jpg"}}" alt="" />Structure of rotary piston compressor Rotary piston compressor, also known as rolling rotor compressor, is mainly composed of 3 parts: casing, motor assembly and compressor assembly. Since there is no reciprocating part, the space volume can be reduced, making the whole structure compact and light.
-
07/05/2020
Full analysis of high-temperature burn-down failure of scroll compressor
Full analysis of high-temperature burn-down failure of scroll compressor Scroll compressor overheating at high temperature for a long time will not only reduce the insulation performance and reliability of the motor, shorten the life of the motor, but also reduce the lubricating ability of the lubricating oil, and even cause carbonization and acid hydrolysis of the lubricating oil.
-
06/14/2020
20 core components of refrigeration and air conditioning
1. Compressor It is the core of the entire air conditioning system and the source of system power. The power of the entire air conditioner is provided by the compressor. Compressors According to the compression method, positive displacement compressors 器2 䀀 ᅵ皥 䖒皦즠Ʋ奌ི 㲈Ʋ 䌁皦 ᮔDž༬皧奖ིЀ 呄ᠾ鹨់༹皧 ࠄ 00령ꐱ댁珵뛐珵Љ 䕄ྦ 뤂ᐱ뚜珵 ᴴᏩ呄ᠾ퍘ᒥ 鹨់ᩄ ꋔྦ 瑉浥 巠皱㙲皦抐皱 巠皱
-
11/04/2021
How to Install Hollow Shaft Encoders, Problems & Solutions
Hollow shaft encoder is also known as hollow encoder. When installing this type of encoders, it is necessary to avoid rigid connection with the encoder.
-
07/31/2020
Principle analysis of monitoring system for cold and heat source equipment
The building automation system is an integrated system platform, in which many subsystems have diverse functions and complex engineering. What is the principle of the cold and heat source equipment monitoring system as one of the many subsystems of the building automation system?
-
03/01/2021
The main difference between brushless DC motor and DC servo motor
Different definitions: (1) Brushless DC motor is a typical mechatronics product, which is composed of motor body and driver. Brushless motor refers to the motor without brush and commutator (or collector ring), also known as commutator less motor. As early as the 19th century, when the motor was born, the practical motor was the brushless form, that is, the AC squirrel cage asynchronous motor, which has been widely used. However, the asynchronous motor has many insurmountable defects, so that the development of motor technology is slow. The transistor was born in the middle of last century, so the brushless DC motor using transistor commutation circuit instead of brush and commutator came into being. This new type of brushless motor is called electronic commutation DC motor, which overcomes the defects of the first generation of brushless motor.
-
06/14/2020
The performance of the car compressor is broken, can the car compressor be repaired
What problems or symptoms will occur when the car compressor is broken? The simplest performance is that the air conditioner does not cool, because the air conditioner compressor is responsible for compressing and driving the refrigerant in the air condit 器2 䀀 ᅵ皥 䖒皦즠Ʋ奌ི 㲈Ʋ 䌁皦 ᮔDž༬皧奖ིЀ 呄ᠾ鹨់༹皧 ࠄ 00령ꐱ댁珵뛐珵Љ 䕄ྦ 뤂ᐱ뚜珵 ᴴᏩ呄ᠾ퍘ᒥ 鹨់ᩄ ꋔྦ 瑉浥 巠皱㙲皦抐皱 巠皱 ੨皦柘皱 ᅵ皥 ب 巠皱㙲皦忈皱 ੨皦柘皱 즠Ʋǜ 勁皦즠Ʋ