Stroke: 1 mm - 2800 mm
Piston diameter: 100 mm
Type code: DSBC
Cushioning: Elastic cushioning rings/pads at both ends: Self-adjusting pneumatic end-position cushioning: Pneumatic cushioning, adjustable at both ends
Mounting position: Any
Design: Profile barrel: Piston rod: Piston
Position sensing: For proximity sensor
Variants: Clamping unit attached: Piston rod at one end: Extended piston rod: Hard scraper: End-position locking with piston rod retracted: End-position locking with piston rod extended: With anti-twist protection: Metal scraper: Low friction: Temperature range 0 to + 150 Celsius Degree: Heat-resistant seals max. 120Celsius Degree: For unlubricated operation: Through piston rod: End-position locking at both ends: Sensor slots on 3 profile sides: Internal thread on piston rod: Temperature range -40 to 80 Celsius Degree: Increased chemical resistance: Low friction for balancer applications: Constant, slow movement: Extended external thread piston rod: Bellows on bearing cap
Operating pressure: 0.05 bar - 12 bar
Mode of operation: Double-acting
ATEX category gas: II 2G
Type of ignition protection for gas: Ex h IIC T4 Gb
ATEX category for dust: II 2D
Type of (ignition) protection for dust: Ex h IIIC T120Celsius Degree Db
Explosive ambient temperature: -20Celsius Degree <= Ta <= +60Celsius Degree
Explosion prevention and protection: Zone 2 (ATEX): Zone 22 (ATEX): Zone 21 (ATEX): Zone 1 (ATEX)
Operating medium: Compressed air as per ISO 8573-1:2010 [7:4:4]
Information on operating and pilot media: Operation with oil lubrication possible (required for further use)
CE marking (see declaration of conformity): as per EU explosion protection directive (ATEX)
Corrosion resistance class (CRC): 2 - Moderate corrosion stress: 3 - High corrosion stress
Ambient temperature: -40 to 150 Celsius Degree
Impact energy in the end positions: 2.5 J
Theoretical force at 6 bar, retracting: 4418 N
Theoretical force at 6 bar, advancing: 4418 N - 4712 N
Moving mass at 0 mm stroke: 1000 g
Additional weight per 10 mm stroke: 101 g
Basic weight with 0 mm stroke: 3665 g
Additional moving mass per 10 mm stroke: 39 g
Type of mounting: With internal thread: With accessories: Optionally:
Pneumatic connection: G1/2
Note on materials: RoHS-compliant
Cover material: Coated: Die-cast aluminum
Seals material: TPE-U(PU)
Material of cylinder barrel: Wrought aluminum alloy: Smooth anodized