Stroke: 1 mm - 2800 mm
Piston diameter: 40 mm
Type code: DSBC
Cushioning: Elastic cushioning rings/pads at both ends: Self-adjusting pneumatic end-position cushioning: Pneumatic cushioning, adjustable at both ends
Mounting position: Any
Design: Profile barrel: Piston rod: Piston
Position sensing: For proximity sensor
Variants: Low friction: With anti-twist protection: Extended piston rod: Temperature range 0 to + 150 Celsius Degree: Hard scraper: Internal thread on piston rod: Extended external thread piston rod: Constant, slow movement: Metal scraper: For unlubricated operation: Piston rod at one end: End-position locking with piston rod retracted: Through piston rod: Temperature range -40 to 80 Celsius Degree: Sensor slots on 3 profile sides: Low friction for balancer applications: End-position locking with piston rod extended: Clamping unit attached: Increased chemical resistance: Bellows on bearing cap: Heat-resistant seals max. 120Celsius Degree: End-position locking at both ends
Operating pressure: 0.1 bar - 12 bar
Mode of operation: Double-acting
ATEX category gas: II 2G
Type of ignition protection for gas: Ex h IIC T4 Gb
ATEX category for dust: II 2D
Type of (ignition) protection for dust: Ex h IIIC T120Celsius Degree Db
Explosive ambient temperature: -20Celsius Degree <= Ta <= +60Celsius Degree
Explosion prevention and protection: Zone 22 (ATEX): Zone 2 (ATEX): Zone 1 (ATEX): Zone 21 (ATEX)
Operating medium: Compressed air as per ISO 8573-1:2010 [7:4:4]
Information on operating and pilot media: Operation with oil lubrication possible (required for further use)
CE marking (see declaration of conformity): as per EU explosion protection directive (ATEX)
Corrosion resistance class (CRC): 2 - Moderate corrosion stress: 3 - High corrosion stress
Ambient temperature: -40 to 150 Celsius Degree
Impact energy in the end positions: 0.7 J
Theoretical force at 6 bar, retracting: 633 N
Theoretical force at 6 bar, advancing: 633 N - 754 N
Moving mass at 0 mm stroke: 205 g
Additional weight per 10 mm stroke: 37 g
Basic weight with 0 mm stroke: 740 g
Additional moving mass per 10 mm stroke: 16 g
Type of mounting: With internal thread: With accessories: Optionally:
Pneumatic connection: G1/4
Note on materials: RoHS-compliant
Cover material: Die-cast aluminum: Coated
Material of cylinder barrel: Wrought aluminum alloy: Smooth anodized