Fuji Belt B-46

09/06/2020

What should I pay attention to when using a cold dryer

Pay attention to the following matters when using the refrigeration dryer: ①The flow pressure and temperature of the compressed air should be within the allowable range of the nameplate;

06/29/2020

Suggestions for troubleshooting of compressor with liquid start

09/10/2020

Causes of Compressor Common Failures and Countermeasures Analysis

Abstract: During the operation of the compressor, some failures and even accidents will inevitably occur. A fault refers to an abnormal condition that occurs during the operation of the compressor, which can be restored to normal operation once the compressor is eliminated, while an accident refers to a damage situation. The two are often related, and if the fault is not eliminated in time, it will cause a major accident.

06/14/2020

Analysis of common failure causes of totally enclosed refrigeration compressor2

Analysis of common failure causes of totally enclosed refrigeration compressor 1. How to identify the three binding posts on the casing of the hermetic compressor? Running end (R), starting end (S), common end (C), the resistance between RS is greater器2䀀
ￜ皥
䖒皦즠Ʋ焬क़㲈Ʋ
䌁皦
ᮔDž༬皧然क़Ѐ呄ᠾ鹨់༹皧
ࠄ
00령ꐱ댁珵뛐珵Љ
䕄ྦ￿￿뤂ᐱ뚜珵ᴴᏩ呄ᠾ퍘ᒥ鹨់ᩄꋔྦ
瑉浥巠皱㙲皦抐皱巠皱੨皦柘皱ￜ皥
ب巠皱㙲皦忈皱੨皦柘皱
즠Ʋǜ勁皦즠ƲبǜV /펔B䌁皦
ᮔDž'鱤džၜ먢䇨珵呈ᠾ뤂ᐱ⿇⬿먲僧ᐱ㥲ᐲ�僬㣢ᐲᠾ
랖僧ѐ識

07/19/2020

Energy-saving techniques for refrigerator systems

Energy-saving techniques for refrigeration systems: Energy adjustment enables the cooling capacity of the compressor to change with changes in thermal load, which is one of the important contents of automatic refrigeration energy-saving control. Different refrigeration compressors or refrigeration units have different emphasis on energy-saving operation and energy regulation.

07/13/2020

Danfoss training-scroll compressor

Danfoss medium temperature refrigeration compressor M series Danfoss MLZ/MLM compressors are specially designed for medium temperature refrigeration applications, using a unique scroll design, providing a variety of refrigerant options (R404A, R134a, R507, R22) cooling capacity covers 2 to 10 horsepower.

09/14/2020

Analysis of the consequences of refrigerant liquid entering the compressor

When the refrigerant liquid entering the evaporator is too much or the evaporation pressure is too low, the cold The medium liquid will be sucked into the compressor. Since the refrigerant liquid is incompressible,

09/03/2020

Energy-saving storm swept the pharmaceutical industry, air compressor transformation is imperative

In the current implementation of energy conservation and environmental protection policies and concepts, the pharmaceutical industry also pays attention to low energy consumption, resource conservation and lower production costs in the operation process.

08/24/2020

What do the refrigeration system overcooling and overheating mean

The so-called "supercooling" is to pass the condensed saturated liquid through a certain device (such as a subcooler) and method (or measure) to recool it so that its temperature is lower than the saturation temperature under the condensation pressure, which is called supercooling .

09/15/2020

Maintenance steps and methods for air filters above GA90

1. Stop the unit and press the emergency button. 2. Clean the surface of the air filter housing. 3. Remove the lock nut and washer from the screw rod. 4. Take out the air filter.