Hager Contactor ESC440Q

The Hager Contactor is high quality!
Architecture
Type of order Not applicable
Number of poles 4 P
Main electrical features
Frequency 50 Hz
Rated operational voltage Ue 400 V
Voltage
Rated insulation voltage 440 V
Command voltage AC 230 V
Rated impulse withstand voltage 4 kV
Electric current
Acceptable current load with AC7 category A 40 A
Acceptable current load with AC7 category B 25 A
Thermal rated current outside of housings 40 A
Power
Inrush power absorbed 62,5 W
Operating consumption 5,75 W
Contact rating with 230 V in AC7 category A 7,3 kW
Contact rating with 230 V in AC7 category B 2,6 kW
Contact rating with 400 V in AC7 category A 22 kW
Contact rating with 400 V in AC7 category B 7,8 kW
Power loss per contact 3,2 W
Total power loss under IN 18,55 W
Power dissipation per coil 0,5 W
Tripping
Time of response when closing 25 ms
Time of response when opening 20 ms
Resistance
Winding resistance 770 Ohm
Endurance
Electric endurance in number of cycles 30000
Number of mechanical operations 1000000
Dimensions
Depth of installed product 60 mm
Height of installed product 85 mm
Width of installed product 54 mm
Fluorescent bulbs control
Max. load fluorescent lamp 1900 VA
Max. power with fluorescent parallel lamps 1300 VA
Fluorescent lamps in duo circuit 3000 VA
Incandescent bulbs control
Max. power with incandescent lamps 4000 W
Installation, mounting
Tightening torque Coil: 2,5Nm, Power: 3,5Nm
Connection
Max cable connect. cross section (flexible) for
control
1 to 6 mm?
Connection cross-section of the control cable solid 1 to 10 mm?
Connection cross-sect. rigid cable 4 /25mm?
Connection cross-sect. flexible conductor 4 / 16mm?
Type of connection with screw
Number of contacts 4
Type of contacts 4NO
Equipment
Can be accessorized yes
Use
Local operation/hand operation no
Standards
European directive WEEE concerned
Safety
Protection class isol.class II
Protection index IP 2
Use conditions
Storage temperature -40 to 80 degrees Celsius
Identification
Device family ESC