HIWIN Linear Guideway MGN15HZO

08/08/2020

The most comprehensive central air conditioning maintenance method

The most comprehensive central air conditioning maintenance method The service life of the central air conditioner is generally 10 years, and it is about 15 years under the correct maintenance. Regular maintenance can reduce the electricity bill.

08/11/2020

8 main points of HVAC field construction experience

1. Equipment installation<br></br> 　　 1. The installation location of the air-conditioning host should be convenient for inspection and repair, and should not affect its use function, especially pay attention to heat dissipation.

07/23/2020

Judgment and repair method of refrigeration compressor jam

First use the AC current gear of the multimeter, clamp the N-terminal lead of the outdoor unit with the clamp head, measure the outdoor unit current, when the compressor is powered on, the measured current is about 65A, which is much larger than the starting current, indicating that the compressor may be stuck Can not start.<br></br>

06/14/2020

What common sense do you need to know about automotive air conditioning refrigerants

What common sense do you need to know about automotive air conditioning refrigerants Air conditioning refrigerant, also known as refrigerant or refrigerant, is one of the greatest inventions in human history. Its contribution to human normal life is seco器2䀀
ￜ皥
䖒皦즠Ʋ煔क़

07/05/2020

Full analysis of high-temperature burn-down failure of scroll compressor

Full analysis of high-temperature burn-down failure of scroll compressor Scroll compressor overheating at high temperature for a long time will not only reduce the insulation performance and reliability of the motor, shorten the life of the motor, but also reduce the lubricating ability of the lubricating oil, and even cause carbonization and acid hydrolysis of the lubricating oil.

06/29/2020

Introduction of measures for compressor pressure protection

Introduction of measures for compressor pressure protection Measures for compressor pressure protection include the following: 1. Control of suction and exhaust pressure When the compressor is running, due to the system or the compressor itself, the discharge pressure may be too high or the suction pressure may be too low. For this reason, the suction and discharge pressures need to be controlled.

06/14/2020

Danfoss cocuses on providing energy efficient, sustainable and smart refrigeration compressors for a varied range of commercial applications such as cold rooms

08/13/2020

Decontamination method of cold storage refrigeration pipe

Before installing the cold storage refrigeration pipe, the rust and dirt on the inner and outer walls of the pipe should be thoroughly removed, and the inner wall should be kept dry.

09/10/2020

Analysis of common problems of air compressor oil filter

1.The perforation problem at the bottom of the oil filter The bottom of the oil filter is perforated, except for a few because the steel plate has blisters, but more because of the material problem of the shell steel. Whether the bottom is easy to perforate is related to the thickness of the shell, but it is not the main reason. When the material of the steel is not good

09/03/2020

Application and quality standards of compressed air in textile industry

After several years of cold winter conditions, the textile industry began to pick up. Domestic and external demand grew at the same time, and there was even a need to expand. As the second largest power source after electricity