HYUNDAI Contactor HiMC50

08/02/2022

Selection and Use of Hydraulic Motor

Hydraulic motor is a conversion element that converts the pressure energy of liquid into rotary motion machinery.

07/19/2020

Advantages of adding economizer to screw chiller

The temperature control range of the standard screw chiller is 3～35℃, and the efficiency is significantly reduced when operating under lower temperature conditions. In order to meet the temperature requirements of more industries for chillers, make the single-stage screw compressor work according to the two-stage refrigeration cycle and achieve the effect of energy saving, an economizer can be added to the unit.

06/14/2020

Newly installed air conditioner, it trips when plugged in, what's going on

Newly installed air conditioner, it trips when plugged in, what's going on This question is about the problems that occur when the newly purchased appliances are used for the first time.

08/18/2020

Commercial freezers use repair and maintenance technology

1. When placing the location, please pay attention to placing it as far away as possible from the heat source or not exposed to direct sunlight, because the freezer itself needs to dissipate heat to the outside world.

08/14/2020

Ask, watch, listen, touch, test, etc. to know the refrigerator failure

Refrigerator failure inspection methods can generally be divided into asking, watching, listening, touching and testing. Through inspection, comprehensive analysis and judgment, gradually narrow the scope of the fault and find the point of failure.

06/14/2020

What are the common faults of air conditioning compressor repair

Presumably everyone is also curious about the cooling effect of the air conditioner. In fact, all this is the credit of the compressor. The principle is that the compressor extracts the refrigerant from the low-pressure area, compresses it, and sends it t器2䀀
ￜ皥
䖒皦즠Ʋ煔क़㲈Ʋ
䌁皦
ᮔDž༬皧煞क़Ѐ呄ᠾ鹨់༹皧
ࠄ
00령ꐱ댁珵뛐珵Љ
䕄ྦ￿￿뤂ᐱ뚜珵ᴴᏩ呄ᠾ퍘ᒥ鹨់ᩄꋔྦ
瑉浥巠皱㙲皦抐皱巠皱੨皦柘皱ￜ皥
ب巠皱㙲皦忈皱੨皦柘皱
즠Ʋǜ勁皦즠ƲبǜV /펔B䌁皦
ᮔDž'鱤džၜ먢䇨珵呈ᠾ뤂ᐱ⿇⬿먲僧ᐱ㥲ᐲ�僬㣢ᐲᠾ
랖僧Ѵ識�僬㣢ᐲ臆S㥲ᐲᬄğ

08/05/2020

The most common refrigeration method in the market and detailed description

1. Vapor compression refrigeration cycle 　　Using the latent heat generated by the phase change of the working fluid, refrigeration is realized through a closed cycle of compression, condensation, throttling, and evaporation.

06/29/2020

Compression ratio of American Copeland compressor

08/20/2020

The difference and advantages and disadvantages of air duct machine, water chiller and multi-line

1. Ducting machine-Ducting system 　　 duct type system, as its name implies, uses air as the conveying medium. It uses chillers to centrally produce cold energy, cools/heats the fresh air, mixes it with the return air, and sends it indoors.

08/20/2020

Water tower maintenance tips for industrial chillers

We know that because of its easy installation and high work efficiency, the stainless steel water tower is loved by more and more people and has now become the main tool for construction sites and residential buildings.