IFM Sensor IGS204

09/10/2020

Regular maintenance and maintenance of Fusheng air compressor

1. Regular maintenance and maintenance of main components In order to enable the air compressor to operate normally and reliably and ensure the service life of the unit, a detailed maintenance plan must be formulated, manned operations, regular maintenance, and regular inspection and maintenance are required to keep the air compressor unit clean, oil-free, and dirt-free.

09/22/2020

The development history of single screw machine

1. The history and current situation of single screw compressor 　　 In 1960, France's B. Zimmern proposed the idea of ​​a single screw compressor and obtained a patent. In 1962, the first prototype was trial-produced, and it was officially produced and put on the market by Peugeot in the early 1970s.

09/10/2020

Design principle of vacuum oil filter

The vacuum oil purifier is designed according to the different principles of the boiling point of water and oil. It consists of a vacuum heating tank fine filter, condenser, primary filter, water tank, vacuum pump, oil drain pump and electrical cabinet.

08/17/2020

Tubular heat exchanger tube bundle failure and flange leakage

1. Tube bundle failure 　　 1. Corrosion and abrasion of the tube bundle cause tube bundle leakage or scale in the tube bundle causes blockage and malfunction

08/17/2020

The function and selection method of throttling capillary in industrial chiller

The capillary tube in the industrial chiller is a pure copper tube with a specified length and a very thin diameter. Its inner diameter is generally between 0.5-2mm. Choose the appropriate length according to the size of the chiller, and then process it i碌7館2䀀締眪

01/05/2021

Refrigerant, compressor, expansion valve (flow control device), evaporator, condenser, pipes and tubes.

Refrigerant, compressor, expansion valve (flow control device), evaporator, condenser, pipes and tubes. Skematic of Compression Refrigeration System

06/29/2020

Suggestions for troubleshooting of compressor with liquid start

08/16/2020

How to deal with liquid nitrogen during cold storage renovation

With the increasing demand for national life, cold chain storage has become an indispensable link in daily life. Therefore, the storage and operation volume of the original cold storage is far from being able to meet the market demand.

08/24/2022

Choose the Right Electric Valve Actuator

The actuator is an indispensable and important part of automatic control system. Its function is to accept the control signal sent by the controller and change the size of the controlled medium

08/14/2020

Central air conditioning chiller water system and ventilation system cleaning method

The central air-conditioning ventilation system mainly includes air ducts, fresh air ducts, central air-conditioning wind cabinets, air outlets, air-sealing outlets, air handling units, and fan coils.