IFM Sensor IIT001

08/21/2020

Why the air-conditioning supplyreturn water temperature is 7℃-12℃

Reason analysis of 7 degree water supply: 　　 1. Starting from the refrigeration unit, the refrigerant evaporates in the evaporator and absorbs heat to cool the secondary side water. If the evaporation temperature is too low, it will cause frost on the surface of the evaporator and affect the heat transfer efficiency.

08/11/2020

The key points that should be paid attention to in the process of central air conditioning construction management

1. Preliminary preparations for central air-conditioning construction<br></br> The construction process of the central air-conditioning is a complex and systematic project.

08/07/2020

Comprehensive analysis of floor heating module knowledge, hurry up and learn!

Comprehensive analysis of floor heating module knowledge, hurry up and learn!<br></br> Floor heating is a heating method that uses ground radiation to dissipate heat.

06/14/2020

Basic structure of piston refrigeration compressor

Piston refrigeration compressor is mainly composed of body, crankshaft, connecting rod, piston group, valve, shaft seal, oil pump, energy adjustment device, oil circulation system and other components.

11/28/2022

Tips to Prevent False Flame Detector Alarm

Flame detectors respond to exposure to radiation from the radiant energy emitted by a fire. Because radiant energy travels at the speed of light

07/26/2020

Common faults and troubleshooting methods of refrigeration compressors

The compressor is the "heart" of the refrigeration system. The compressor sucks low-temperature and low-pressure refrigerant gas from the suction pipe, drives the piston to compress it through the operation of the motor, and then discharges the high-temperature and high-pressure refrigerant gas to the exhaust pipe to provide power for the refrigeration cycle to realize the refrigeration cycle. The editor summarizes the common faults and troubleshooting methods of the compressor to help you better maintain the compressor.

09/15/2020

Motor and generator

Motor and generator SKF has long and extensive experience in the motor industry and most industries that use motors and generators. In this highly competitive industry, SKF's rich knowledge has been used to develop various solutions to meet the growing needs of people in improving quality, shortening delivery time, reducing noise levels and improving technical support.

09/05/2020

Ten points to judge the pros and cons of inverter products!

The technical grade of the frequency converter is gradually developed and formed. With the improvement of use requirements and the development of technology, the quality of the device, the expansion of functions, and the progress of automation technology, it will gradually advance.

06/29/2020

What is the cause of compressor pipeline vibration

08/03/2020

HVAC essential! Three steps to accurately calculate the cooling capacity of central air conditioning

The cooling capacity calculation of central air-conditioning is divided into three steps: 1. Calculate the actual cooling capacity required: Calculate according to the practical area of ​​the room (carpet area, the floor area of ​​the home can be deducted from the floor area); 150 watts per square meter;