0...25 bar;
0...363 psi;
0...2.5 MPa;
1/4" NPT internal thread;
analogue signal;
4...20 mA;
IFM Sensor PA3222
People who bought this item also viewed
IFM Sensor PI2798
IFM Sensor IT5040
IFM Sensor IGS312
IFM Sensor PI1698
TAKEX Sensor GTL3N
Banner Sensor SMA990LT
Contrinex Sensor DW-AD-509-M18-120
Dwyer Transmitter MS-721
Tyco Flame Detector MS302EX
Customers frequently viewed
IWAYA DENKI Water Pump 25CJT0752
Panasonic Servo Motor MHMF022L1V2M
Honeywell Solenoid Valve VE4025B1045
ROTEN Mechanical Seal 8E5K-22-X
SANDSUN Overload Pump VA08H-760
GS Battery 6-QW-60(450)-(55D23L-KR)
Rechi Compressor 44R273A
MINDMAN Air Cylinder MCQV2-11-40-200
Mitsubishi Compressor YB645WTG
SuperRed Fan CHA17248EB-O
PIZZATO Switch FX 2015-M2
Recent related posts
-
09/24/2022
Piston Pump: Working Principle, Types, and Features
Piston pump is a kind of positive displacement pump. It relies on the reciprocating motion of the piston in the pump cylinder to make the working volume of the cylinder expand
-
08/08/2020
Reasons for condensation at the bottom of the condenser
Reasons for condensation at the bottom of the condenser 1. It is abnormal if condensation occurs at the bottom of the condenser when the unit is running. It may be the reason for the low amount of refrigerant.
-
08/05/2020
Common oil shortage failures of scroll refrigeration compressors
Common oil shortage failures of scroll compressors<br></br> The compressor is short of oil for a long time-the mechanism and the friction pairs are overheated, causing the bearings to sinter and hold the shaft
-
09/05/2020
Analysis on the components of compressed air system
The compressed air system is composed of the air supply end to the air consumption end as follows: air compressor→air storage tank→filter→dryer→air pipeline→air port.
-
02/28/2021
Performance characteristics of Panasonic Minas series Panasonic AC servo
The output power of Panasonic AC servo motor is generally 0.1-100 W, and the power frequency is divided into 50 Hz, 400 Hz, etc. It is widely used in various automatic control and recording systems 1.Miniaturization design 1) Through the best thermal analysis of the driver, the miniaturization is realized. Compared with the past, the volume is 75% and the weight is 80% 2) The new punching process of thin die steel plate has greatly reduced the iron loss, shortened the motor length (70% in the past) and reduced the number of drive models. It adopts current grading method to prepare and maintain. One driver is suitable for multiple motors and can identify automatically.
-
08/19/2020
How to solve the drainage problem of window air conditioner
Although window air conditioners are not common in life, some consumers still use them. We should also have some understanding of window air conditioners. Compared with split air conditioners
-
07/17/2020
Difference between original and refurbished Emerson Copeland Scroll compressor
Difference between original and refurbished Emerson Copeland Scroll compressor Now the most important thing for customers to buy compressors is whether they are genuine. Nobody wants to buy a fake machine after spending money. Here, we briefly introduce how to distinguish the authenticity of the Copeland compressor.
-
08/04/2020
Analysis of five major problems in current heating management
With the development of society and the continuous improvement of people's living standards, traditional heating methods and management models have become less and less suitable for the development of the times.
-
06/29/2020
Too small selection results in insufficient compressor displacement
Too small selection results in insufficient compressor displacement Many users just start not knowing the specific gas consumption of their own production, so they blindly select the model according to their own estimates, resulting in exhaust pressure not coming up, below the rated exhaust pressure, which cannot meet the normal gas consumption of the factory.
-
07/14/2020
Compressor 9 types of faults and hazard analysis are all here! ! !
Compressor 9 types of faults and hazard analysis are all here! ! ! 1. Common faults of compressor — start with liquid Starting with fluid is a problem that easily occurs when the machine is stopped. During shutdown, the refrigerant will migrate from the system back to the compressor and deposit in the lubricant.