IFM Sensor PN2670

08/20/2020

Installation and placement conditions of cooling tower of thermal shock tester

Let's learn about the installation and placement conditions of the cooling tower of the thermal shock tester with the editor of okmarts.com! 1. The ground is flat and well ventilated;

07/15/2020

About the built-in pressure relief valve (IPR valve) of Copeland compressors

About the built-in pressure relief valve (IPR valve) of Copeland compressors Among the built-in protection devices of Copeland compressors ZB15-ZB48, ZF06-ZF25, there is a small pressure protection device called built-in pressure relief valve (IPR valve). Below we briefly talk about the work of the built-in pressure relief valve.

09/09/2020

Selection criteria and skills of oil filters

The quality of hydraulic oil has a great influence on the working performance of the hydraulic system. Many faults are rooted in it. To prevent oil contamination, install a hydraulic oil filter in an appropriate place to trap the contaminants in the oil and keep the oil clean. , To ensure the normal operation of the oil system.

03/15/2021

ALPHA Alpha Servo Drive Repair

Common faults of Alpha servo drives include: power-on without display, with display without output, overcurrent, overvoltage, undervoltage, overheating, overload, overspeed, phase loss, jitter, encoder abnormality, module damage, ground fault, parameters Errors etc.

04/05/2023

10 Causes of AC Compressor Failure & 4 Ways to Prevent It

When the weather is very cold or hot, once the air conditioner fails, it will be miserable. So it is necessary to know the possible faults of an air conditioner compressor and some preventive ways in advance.

09/09/2020

Harmfulness of air compressor motor direct full pressure start and the benefits of motor soft start cabinet

With the development of my country's economy, the application of motors is increasing, and people's attention is paid to the starting method of motors. Generally speaking, the motor soft start cabinet should be used when the motor power exceeds 30KW, otherwise it will seriously affect the operation of other equipment in the power grid and damage the motor itself.

08/16/2020

Where is the key technology of ammonia refrigeration system construction

1. Refrigeration compressor installation 　　 Before the refrigeration compressor is in place, clean the soil and dirt from its bottom and foundation bolt holes, and clean up the foundation surface that has passed the acceptance.

06/29/2020

Several causes of compressor burning

08/20/2020

Don't blindly repair the refrigeration compressor if it fails to contact the manufacturer is the best policy

The environmental temperature and humidity test box is mainly used for product temperature, humidity alternating and high and low temperature rapid alternating cycle tests, and its purpose is to detect the reliability of products under high and low temperature impact tests.

04/15/2022

What is A Thermal Mass Flowmeter?

TMF is the abbreviation of thermal mass flowmeter. The thermal mass flowmeter can also be called the thermal gas flowmeter.