IFM Sensor SF120A

09/10/2020

The problem of cement rotary kiln belly up may be that the motor is overloaded

What does the cement rotary kiln mean? As the name suggests, it means that the amount of ore in the cement rotary kiln is too large and exceeds the amount required by the rotary kiln.

06/22/2020

How often does the freezer cool

It is normal for the freezer to cool once every 10-20 minutes. The cooling time of the freezer is not fixed, it is related to the set temperature, usage, storage items and service life. If it's a new refrigerator you just bought, you set it to 4th gear cooling, you may have to wait a few hours before cooling, this is because the new refrigerator is synchronized with the room temperature, cooling requires a process. <img src="{{media url=&quot;magefan_blog/How_often_does_the_freezer_cool.jpg&quot;}}" alt="" />

08/13/2020

Some common ways to reduce noise in cooling towers

Taking a circular countercurrent cooling tower as an example, the basic principle of its operation is: dry and low enthalpy air enters the cooling tower from the lower part of the cooling tower;

06/21/2020

Common faults and maintenance of air compressor

Common faults and maintenance of air compressor <img src="{{media url=&quot;Common_faults_and_maintenance_of_air_compressor.jpg&quot;}}" alt="" /> Common faults and maintenance of air compressor 　　 Air compressors are widely used in various industries with the development of technology, but no matter what type of air compressor, there will be some problems in the process of use. The following editors will now introduce some common faults and maintenance methods, let's take a look.

06/29/2020

Suggestions for troubleshooting of compressor with liquid start

08/24/2020

The 8 accessory usages that must be mastered when using computer room air conditioners!

Precision air conditioners are high-precision air conditioners used in computer rooms that can control the temperature and humidity of the computer room. Its design is to solve the large load heat density in the data center.

09/05/2020

What is the basis for the rated flow when selecting the filter

When selecting a filter, the rated capacity should not be selected according to the diameter of the pipe, but the nominal flow of the filter (nameplate flow) should be selected according to the volumetric flow of the compressed air passing through the filter.

06/14/2020

The difference between air compressor and refrigeration compressor

The air compressor is the same as the refrigeration compressor in that it is the same compressor, the difference is that its working principle and working medium are different.

07/08/2020

For cold storage to be more energy efficient, this should be done!

For cold storage to be more energy efficient, this should be done! 1. The index for reducing the unit heat flow of the cold storage enclosure structure. In the design of the cold storage, the unit heat flow q of the outer wall of the low-temperature cold storage is generally about 11.63W. If the q can be reduced to 6.9W, for a 5000T~10000T class In low-temperature cold storage, it is estimated that the power cost can be reduced by about 10%.

07/16/2020

How to see if the refrigerant leaks in the high and low temperature test chamber

How to check whether the refrigerant leaks in the high and low temperature test box; the standard high and low temperature test box and the constant temperature and humidity test box are all selected by the air-cooled compressor, and the working principle is the same as that of the air conditioning refrigeration