The ITECH Power Supply is high quality! Display screen: VFD display
Maximum output voltage and current are up to 150V and 60A respectively
Maximum output power of single channel up to 1200W, in configuration of
Output voltage 80V and output current 60A (IT6512, IT6512A)
Output voltage 150V and output current 30A (IT6513, IT6513A)
High output voltage and current resolution
1mV/1mA (IT6502D, IT6512, IT6512A)
3mV/1mA (IT6513, IT6513A)
High output voltage and current accuracy
< = 0.02percent + 30mV/< = 0.1percent + 1percentFS (IT6502D, IT6512, IT6512A)
< = 0.05percent + 30mV/< 2percent + 0.1percentFS (IT6513, IT6513A)
High voltage and current readback resolution
1mV/1mA (IT6502D, IT6512, IT6512A)
3mV/1mA (IT6513, IT6513A)
High output voltage and current readback accuracy
< = 0.02percent + 30mV/< = 0.1percent + 1percentFS (IT6502D, IT6512, IT6512A)
< = 0.05percent + 30mV/< 2percent + 0.1percentFS (IT6513, IT6513A)
Load regulation
< 0.01percent + 8mV/< = 1percent + 10mA (IT6502D)
< 0.01percent + 8mV/< 0.1percent + 10mA (IT6512, IT6512A)
< 0.05percent + 30mV/< 0.1percent + 30mA (IT6513, IT6513A)
Line regulation
< 0.02percent + 2mV/< 0.02percent + 2mA (IT6502D, IT6512, IT6512A)
< 0.02percent + 20mV/< 0.02percent + 10mA (IT6513, IT6513A)
Low ripples/low noise (20Hz-20MHz)
< = 30mVp-p (IT6502D)
< 30mVp-p (IT6512, IT6512A)
< 60mVp-p (IT6513, IT6513A)
Power source: CV/CC modes
Convenient data entry via knob or numerical key pad
Can use the knob to adjust voltage and current
Can adjust the numbers steps using the cursor
Adjustable rising and falling time. No matter it is under the power supply mode (CV, CC), the IT6500E Series support independent adjustable rise/fall time setting in different modes, and the setting up range is 1ms-24h
Output programmed voltage and current
Support parallel function, automatic even current distribution
List mode: Capable output wave based on edit voltage/current with time variations
Remote sense: The remote sense interface to compensate line voltage, increase output accuracy
Protection functions
Power source: OVP, OCP, OPP, OTP
Turn-off protection
Under voltage protection
Sense compensate voltage: < = 2V
Isolation (output to ground): 300V
Memory capacity: 100 groups, for save and recall
Built-in DIN 40839 and ISO-16750-2 standard voltage curves for automobile power net (IT6512, IT6513)
Intelligent fan control, energy conservation and noise reduction
Versatile interface
RS232, RS485, USB and GPIB come as standard for all models
External 0-10V Analog Control Interface (IT6502D, IT6512A, IT6513A)