The ITECH Power Supply is high quality!
Display screen: VFD display
A 2-in-1 instrument: Power supply and power meter (See photo section)
The IT7300 Series adopts latest linear amplifier technology which greatly reduce the output noise and ensure high working stability to obtain precise and accurate measurement results
Maximum output power up to 3000VA, in configuration of
Output voltage 300V and output current 24A (IT7326)
Output voltage 500V and output current 12A (IT7326H)
High setting resolution
Voltage: 1V
Current: 1mA in max
Power: 01W in max
Frequency: 1Hz at 45-99.9Hz and 1Hz at 100Hz-500Hz
Phase: 1degree
High measurement accuracy
Voltage: plus or minus0.2percent+ 0.6V
Current: plus or minus0.2percent+ 0.6mA in max
Power: plus or minus0.2percent+ 0.2W (47Hz - 65Hz) in max
Load regulation: < = 0.5percentFS (Resistive load)
Line regulation: 1percentmax for a plus or minus10percentline change
Response time: < 0.00001s
Convenient data entry via knob or numerical key pad
Can adjust the stepping by left/right arrow button
Programmable frequency: 45Hz - 500Hz
Programmable voltage and current limit settings
Display Vrms, Irms, Ipeak, frequency, PF, apparent power and active power simultaneously
Support front and rear panel output
Power line disturbance simulation capability
IEC61000-4-11, IEC 61000-4-14, IEC 61000-4-28 voltage dips and frequency variation simulation
Dimmer function
Turn on, turn off phase angle control (0-360degree)
TTL signal which indicates output transient
List mode to generate surge, sag and other line
Protection function: OVP, OCP, OPP, OTP
Memory capacity on 10 groups, for save and recall
Dimension
19.5inch 2U (IT7321)
19inch 2U (IT7322, IT7322H, IT7324, IT7324H)
19inch 6U (IT7326, IT7326H)
Provide free remote control software (IT9000-PV7300) with strong function saving secondary development time
Versatile interface
RS232, USB and LAN (IT7321)
RS232, USB, LAN and GPIB (IT7322, IT7322H, IT7324, IT7324H, IT7326, IT7326H)