Model JF0825B1UM-R
size 80x80x25mm
Part Description DC12V0.37A, 80x80x25mm
Part Number JF0825B1UM-R
Info 3-Wire
JAMICON Fan JF0825B1UM-R
People who bought this item also viewed
ADDA Fan AB7605HX-GE3
KAKU Fan KA1238HA2SMT
Sanyo Denki Fan 9GV0412P3K04
Nidec Fan V92E12BGA7-57T04
Mitsubishi Compressor YB645VMCC
Delixi Transformer JBK-600VA
RIKEN Contactor RPR-40
ZHONGDA Electric Motor 5IK90A1-CF
Rexroth Filter R928005524 ABZFE-R450
Danfoss Sight Glass SGP6S
SPRAGUE Capacitor 1000V 0.33UF
Customers frequently viewed
IWAYA DENKI Water Pump 25CJT0752
Panasonic Servo Motor MHMF022L1V2M
Honeywell Solenoid Valve VE4025B1045
ROTEN Mechanical Seal 8E5K-22-X
SANDSUN Overload Pump VA08H-760
GS Battery 6-QW-60(450)-(55D23L-KR)
Rechi Compressor 44R273A
MINDMAN Air Cylinder MCQV2-11-40-200
Mitsubishi Compressor YB645WTG
Contrinex Sensor DW-AS-601-M30
PIZZATO Switch MK V41F45
Mean Well Power Supply HRP-150-15
Recent related posts
-
01/13/2021
Refrigerator compressor is hot and not cooling
Refrigerator compressor is hot and not cooling The structure of household refrigerator products is not complicated, generally composed of compressor, condenser, filter drier, capillary tube, evaporator and other important components connected into a loop 器2 䀀 ᅵ皥 䖒皦즠Ʋ奌ི 㲈Ʋ 䌁皦 ᮔDž༬皧奖ིЀ 呄ᠾ鹨់༹皧 ࠄ 00령ꐱ댁珵뛐珵Љ 䕄ྦ 뤂ᐱ뚜珵 ᴴᏩ呄ᠾ퍘ᒥ 鹨់ᩄ ꋔྦ 瑉浥 巠皱㙲皦抐皱 巠皱 ੨皦柘皱 ᅵ皥 ب 巠皱㙲皦忈皱 ੨皦柘皱 즠Ʋǜ 勁皦즠Ʋب ǜ V / 펔B䌁皦 ᮔDž '鱤džၜ먢䇨珵呈ᠾ뤂ᐱ ⿇⬿먲僧ᐱ㥲ᐲ�僬㣢ᐲ
-
09/06/2020
Application of High Pressure Soft Start on Compressor Load
Abstract: The high-voltage and high-power motor has a relatively large impact on the load and the power grid when starting. Thyristor series high-voltage soft starters are widely used for their superior starting performance and other advantages.
-
09/17/2020
Introduction to the principle of electric screw machine
One. The electrical control system of the microcomputer controller electric screw air compressor is the key system of the electric screw compressor. Its main function is to reduce the voltage and reduce the starting current when the three-phase asynchronous motor (capacity is greater than 10KW) is started, so as not to generate excessive power in the power supply line. Voltage drop to reduce the impact on the grid.
-
09/14/2020
The exhaust temperature of the unit is high (over 100℃)
The lubricating oil level of the unit is too low (the green position should be visible from the oil level mirror);
-
06/20/2020
Application advantages and working process analysis of air energy heat pump
Air energy heat pump is to use the energy in the air to generate heat energy. It can provide 24 hours a day with large water volume, high water pressure and constant temperature to provide the family with different hot water, cooling and heating needs, and at the same time can meet the above requirements with the least energy consumption.<img src="{{media url="Application_advantages_and_working_process_analysis_of_air_energy_heat_pump.jpg"}}" alt="" />
-
09/13/2022
Differences between a Sensor and an Actuator
A sensor is a detection device that can sense the measured information, and can transform the sensed information into electrical signals or other required forms of information output according to certain rules to meet the requirements of information transmission
-
07/31/2020
Common problems and solutions of industrial chillers summarized by the maintenance master
1. Water leakage (first determine the location of the water leakage)<br></br> 1. Water leakage from the pump (causes: the shaft seal at the water pump is not well connected or the shaft seal has been damaged)
-
06/14/2020
Compressor
Compressor: It is the heart of refrigeration and heating cycles.
-
08/19/2020
The impact of excessive or small pump flow on the chiller
The chiller may have various types of failures. Why does the water pump fail with too much or too little flow?<br></br> In fact, whether the flow of the water pump is too large or too small, it will have a certain impact on the operation of the chiller, so it is not a good thing that the flow is too large or too small.
-
07/26/2022
Classification of Vane Pumps
During a rotation cycle, the volume between adjacent vanes changes because of the rotor’s eccentric mounting position. This creates the pumping action.