Johnson Controls Actuator VA-7706-1001
People who bought this item also viewed
Johnson Controls Actuator M9116-ADC-1N
Johnson Controls Actuator VA9109-GGA-4
Johnson Controls Actuator M9104-GGA-2S
Honeywell Actuator ML7425A6016
Honeywell Actuator V4062A1198
Honeywell Actuator V4055A1031
MINDMAN Air Cylinder MCQA-21-80-150
Customers frequently viewed
IWAYA DENKI Water Pump 25CJT0752
Panasonic Servo Motor MHMF022L1V2M
Honeywell Solenoid Valve VE4025B1045
ROTEN Mechanical Seal 8E5K-22-X
SANDSUN Overload Pump VA08H-760
GS Battery 6-QW-60(450)-(55D23L-KR)
Rechi Compressor 44R273A
MINDMAN Air Cylinder MCQV2-11-40-200
Mitsubishi Compressor YB645WTG
OMRON Power Supply S8FS-C03512J
AirTAC Air Cylinder SC200X440S
PHOENIX Relay 1009831
SCHMERSAL Switch UK432Y
Recent related posts
-
05/24/2023
Why is My AC Compressor Not Turning on and What to Do?
The air conditioner compressor (AC compressor) is generally installed in the outdoor unit. When the air conditioner is running, the compressor sucks the refrigerant from the low-pressure area
-
07/08/2020
This is the key method to solve the leakage problem of fan coil
The fan coil and fresh air system is a widely used air-conditioning method. Because of its flexible layout and the ability of each room to be adjusted independently, it is commonly used in hotels, hotels, office buildings, hospitals and other buildings. However, many problems are often caused by mistakes in construction and design, and the most common one is water leakage.
-
06/19/2020
How good is the air conditioning dehumidification
Nowadays, the temperature of some air conditioners is set actively by the manufacturer during dehumidification. Under the dehumidification method of this type of air conditioner, the control circuit will first check the room temperature, and then set the operating temperature policy value. The setting value of the factory plan is usually the policy value of the operation arrival It is 2 degrees lower than the room temperature. If the setting is too high, the dehumidification effect is not significant. In order to prevent overheating and lowering the room temperature during dehumidification, this set value is usually judged. At this time, we do not need to set the temperature, just open the air conditioning dehumidification function.<img src="{{media url="How_good_is_the_air_conditioning_dehumidification.jpg"}}" alt="" />
-
06/13/2020
Water hammer occurs when the pump is stopped, which is very harmful! How to break First, stop the pump water hammer and its hazards
In the pressure pipe flow, the momentum conversion is caused by the rapid change of the flow rate, thereby generating a series of sudden hydraulic impact phenomena with alternating pressure in the pipeline, called the water hammer phenomenon. When the cen 器2 䀀 ᅵ皥 䖒皦즠Ʋ煔क़ 㲈Ʋ 䌁皦 ᮔDž༬皧煞क़Ѐ 呄ᠾ鹨់༹皧 ࠄ 00령ꐱ댁珵뛐珵Љ 䕄ྦ 뤂ᐱ뚜珵 ᴴᏩ呄ᠾ퍘ᒥ 鹨់ᩄ ꋔྦ 瑉浥 巠皱㙲皦抐皱 巠皱 ੨皦柘皱 ᅵ皥 ب 巠皱㙲皦忈皱 ੨皦柘皱 즠Ʋǜ 勁皦즠Ʋب ǜ V / 펔B䌁皦 ᮔDž '鱤džၜ먢䇨珵呈ᠾ뤂ᐱ ⿇⬿먲僧ᐱ㥲ᐲ�僬㣢ᐲ ᠾ 랖僧Һ 識 �僬㣢ᐲ 臆S㥲ᐲ ᬄğ 識 理艏S杴 識杴 㥲ᐲ
-
08/15/2020
How much does temperature affect the semi-hermetic refrigeration compressor
Due to the high temperature in summer, some products that are more sensitive to temperature are easily affected by temperature. The use of semi-hermetic refrigeration compressors has a temperature limit.
-
07/01/2020
Analysis of the main advantages of Copeland compressors
Analysis of the main advantages of Copeland compressors Copeland compressors not only have a high reputation, but also stand out among well-known brands. It is precisely because Copeland compressors have the advantages that most compressors have or do not have.
-
08/11/2020
Common practice of oil return design in refrigeration system
When the condenser is installed higher than the compressor, a U-shaped bend is required at the intake pipe of the condenser to prevent oil from returning to the exhaust side of the compressor during shutdown and also help prevent liquid refrigerant from the condenser
-
07/05/2020
Why is frost formed between the electronic expansion valve and the compressor
Why is frost formed between the electronic expansion valve and the compressor? A customer asked: The compressor is suddenly not cooling, and the electronic expansion valve is frosted to the compressor. Is there any relationship between the two before?
-
07/30/2020
Reason analysis of refrigeration compressor can not start or stop soon after start
First check the main circuit. Whether the power supply has electricity, whether the voltage is normal, whether the fuse has been blown due to starting overload, whether the air switch has tripped,
-
03/10/2023
Advantages of Motor Soft Starter
Motor is widely applied in industry and daily life, thus people attach more importance to the starting method of motor. Generally, motor soft starter should be used when motor working power exceeds 30 kilowatts