JSCC Speed Reducer 80GK30H

08/19/2020

The importance of industrial chiller sealing and the hazards of entering air

During the use of industrial chillers, there are many factors that will cause the equipment to deteriorate. At this time, it is necessary for the enterprise to find the cause and solve it.

08/29/2020

Is the temperature difference between the inlet and outlet of the cold dryer the bigger the better

Since the refrigeration dryer removes water by cooling the compressed air, many users think that the lower the outlet air temperature of the refrigeration dryer, the better,

09/09/2020

What are the requirements of light industry for air compressors

The application industry of air compressors is very wide, which can be said to be all walks of life, but it is worth mentioning that different industries have different requirements for air compressors. Let's introduce the requirements of light industry for air compressors!

08/24/2020

How to use cold storage management system in cold chain enterprises

With the rapid development of the cold chain logistics industry, the scale of some cold storage is gradually expanding, and the challenges they face are increasing. For example: how to reasonably plan the cold storage space

01/23/2025

How to Test a Wheel Speed Sensor?

The wheel speed sensor is used to test the wheel speed of a car. For modern vehicles, wheel speed is essential.

08/20/2020

Precautions when the FRP cooling tower is assembled and ready for operation

When the FRP cooling tower is assembled and ready for normal operation, the following necessary inspections should be done first:

09/07/2020

Why can't the lubricating oil in the air compressor be replaced by hydraulic oil

Lubricating oil 　　Lubricant is a kind of lubricant. It is located between two objects in relative motion and has the function of reducing friction between two objects due to contact. In addition, it also has the functions of cooling,

07/18/2020

reasons why the constant temperature and humidity test chamber does not cool

1. Introduction The phenomenon that liquid refrigerant and/or lubricating oil damage the suction valve plate when the gas is sucked into the cylinder of the compressor, and it is produced when the piston is compressed when the piston is close to the top dead center and is not quickly discharged during the exhaust process after entering the cylinder.

08/07/2020

How to vent the industrial chiller of the refrigerant refrigeration system

1. When using an air separator to discharge air, place the return valve of the air separator in a normally open state to reduce the pressure of the air separator to the suction pressure, and other valves should be closed.

06/29/2020

Compression ratio of American Copeland compressor