JSCC Reduction Drive 90YT90GV22X

01/05/2021

Real Gas Model for an Electric Swashplate Refrigeration Compressor

Real Gas Model for an Electric Swashplate Refrigeration Compressor Author links open overlay panelMohammadArqam1Dzung VietDao1AmirJahangiri2MarkMitchell2PeterWoodfield1 1 School of Engineering and Built Environment, Griffith University, Australia 2 U器2䀀
ￜ皥
䖒皦즠Ʋ嫜ི㲈Ʋ
䌁皦

09/08/2022

Brushless Vs Brushed Motor

The following article introduces some differences between brushed motors and brushless motors in terms of working principle and performance, hoping to deepen your understanding of them.

07/31/2020

What are the failures of the air conditioning refrigeration system (R410A)

When it is assumed that the system is blocked by welding, first check whether the system pressure and current are normal. You can use a pressure gauge to measure the suction pressure.

02/20/2024

Electric Furnace vs. Gas Furnace: Working Principle, Pros ＆ Cons, Factors to Consider

As winter approaches and the need for a reliable heating system becomes paramount, the choice between an electric furnace and a gas furnace is a decision many homeowners must grapple with.

08/17/2020

Temperature has a great influence on refrigeration and air-conditioning systems, don’t you know

The relevant temperature of the components of the refrigeration and air-conditioning system has a normal temperature range, and it is an abnormal state if it exceeds this range.

08/14/2020

Need heat preservation for precision air conditioner cooling pipes

Whether the cooling water pipes of precision air conditioners should be insulated depends on specific conditions. Under normal circumstances, it is not insulated,

09/17/2020

Introduction to the principle of electric screw machine

One. The electrical control system of the microcomputer controller electric screw air compressor is the key system of the electric screw compressor. Its main function is to reduce the voltage and reduce the starting current when the three-phase asynchronous motor (capacity is greater than 10KW) is started, so as not to generate excessive power in the power supply line. Voltage drop to reduce the impact on the grid.

09/07/2022

Troubleshooting of Overflow Valves

Overflow valve is one of the classic industrial products. Today, let's take a look at its common faults and how to solve them.

08/08/2020

Reasons for condensation at the bottom of the condenser

Reasons for condensation at the bottom of the condenser 1. It is abnormal if condensation occurs at the bottom of the condenser when the unit is running. It may be the reason for the low amount of refrigerant.

06/29/2020

Compression ratio of American Copeland compressor