KCL Vane Pump VQ215-32

09/05/2020

What are the reasons for excessive oil content in exhaust gas and how to deal with it

1) The screw oil level is too high. If the oil level is too high, the fluctuation of the liquid level in the oil and gas barrels during the operation of the unit will cause a large amount of gas to enter the oi

09/09/2020

Comparison of screw type and piston type air compressor

Friends who are often exposed to air compressors should know the basic difference between piston air compressors and screw air compressors. They have obvious differences in structure, moving parts and operating parts, as well as consumption life and performance. , The following brings you some knowledge about the difference between the piston machine and the screw machine.

11/03/2021

Do You Really Understand Human Machine Interface (HMI) - HMI Q&A

Q1: Is HMI only used to connect to PLC? That’s not true. HMI products are originally produced to solve the problem of PLC human-computer interaction.

09/05/2020

Ten points to judge the pros and cons of inverter products!

The technical grade of the frequency converter is gradually developed and formed. With the improvement of use requirements and the development of technology, the quality of the device, the expansion of functions, and the progress of automation technology, it will gradually advance.

05/23/2022

What is A Safety Light Curtain?

Safety light curtain is a safety certified light curtain product, which is composed of two parts-light sender and light receiver.

06/14/2020

Danfoss cocuses on providing energy efficient, sustainable and smart refrigeration compressors for a varied range of commercial applications such as cold rooms

08/15/2020

Characteristics of oil cooler and attention issues

An oil cooler is a heat exchanger that uses air to cool hot fluid. Like other coolers, rust scale will appear. The rust scale appears mainly because the cooling water contains a large amount of calcium, magnesium ions and acid carbonates.

08/11/2020

Common practice of oil return design in refrigeration system

When the condenser is installed higher than the compressor, a U-shaped bend is required at the intake pipe of the condenser to prevent oil from returning to the exhaust side of the compressor during shutdown and also help prevent liquid refrigerant from the condenser

08/09/2020

Types of heat exchangers in the industrial chiller industry

For our refrigeration and heating industry, evaporators and condensers are used in many equipment, but let me tell you that with the continuous development of the industry, the evaporators and condensers of industrial chillers are also constantly changing In

05/01/2022

How to Judge The Model of AC Contactor?

Contactor is the most basic and common electrical component in relay control system. It is mainly used to connect and disconnect lines, or frequently control the operation of motors and other equipment.