There is no price at present, you can Request a Quote
Minimum detection object: diameter 25 mm
Optical axis distance / lens diameter: 20 mm / diameter 5
Detection distance: 0.2 to 15 m * 1
Effective opening angle: +/- 2.5 degree (above 3 m)
light source: Infrared LED (870 nm)
Response time (OSSD) (ms):
Wired sync or Light sync (channel 0):
ON OFF: 13.9
OFF ON: 59.7* 2
Asynchronous ON: 92.5 * 3
Light sync (channel A or B): ON OFF: 20.6
During light synchronization (channel A or B):
OFF ON: 69.7* 2
Asynchronous ON: 119.2 * 3
Detection method: Turn on when the beam axis is receiving light (except when using the fixed blanking function)
Synchronously: Optical synchronization / Wired synchronization (can be selected according to wiring)
Prevent mutual interference function: Light synchronization: interference prevention for up to 2 devices with the setting of a button
Wired sync: Automatic interference prevention for up to 2 devices
Control output (OSSD output):
Output type: Transistor output × 2 (PNP / NPN can be switched according to the cable)
Load current: 500 mA or less * 4
Residual voltage (when open): 2.5V (at 5 m cable)
Voltage when closed: 2.0V (at 5 m cable)
Leakage current: 200 ?A max
Maximum load capacity: 2.2 ?F
Load connection resistance: 2.5 ohm max
Auxiliary output(Non-safety output):
AUX:
Error output: Transistor output (PNP / NPN can be switched according to the cable)50mA or less, residual voltage 2.5V or less (at 5 m cable)
Backlight does not protect lamp output: Incandescent (24 VDC, 1 to 5.5 W)LED light (load current 10 to 230 mA)
External input:
When using a PNP output cable:
Turn-on voltage: 10 to 30V
Off voltage: open or 0 to 3V
Short-circuit current: about 2.5 mA (only 10 mA for EDM input)
When using NPN output cable:
Turn-on voltage: 0 to 3V
Off voltage: open circuit or above 10V
Below power supply voltage
Short-circuit current: about 2.5 mA (only 10 mA for EDM input)
Rating: voltage: 24VDC +/- 20% ripple (P-P) less than 10% class2
power supply:Consumption current(At maximum) (mA):
launcher79 * 5
receiver89* 5
protect the circuit: Reverse power protection, short-circuit protection for each output, surge protection for each output
Meet specifications:
EMC:
EMS: IEC61496-1, EN61496-1, UL61496-1
EMI: EN55011 ClassA, FCC Part15B ClassA, ICES-003 ClassA
Safety:
IEC61496-1, EN61496-1, UL61496-1 (Type4 ESPE)
IEC61496-2, EN61496-2, UL61496-2 (Type4 AOPD)
IEC61508, EN61508 (SIL3), IEC62061, EN62061 (SIL CL3)
EN ISO13849-1: 2015 (Category 4, PLe)
UL508
UL1998
Environmental resistance:
Enclosure protection level: IP65 / IP67 (IEC60529)
Overvoltage category: II
Ambient light: Incandescent lamp: 3,000 lux or less, Sunlight: 20,000 lux or less
Use ambient temperature: -10 to +55 degree C (no freezing)
Ambient storage temperature: -25 to +60 degree C (no freezing)
Use of ambient humidity: 15 to 85% RH (non-condensing)
Storage environment humidity: 15 to 95% RH
Earthquake resistance: 10 to 55 Hz, double amplitude 0.7 mm, 20 sweeps each in X, Y, and Z directions
Impact resistance: 100 m / s2 (about 10 G), 16 ms pulse, 1,000 times each in X, Y, and Z directions
Material:
Body shell: aluminum Upper cover / lower cover: Nylon (GF30%)
Front shell: Polycarbonate, SUS304
weight:
launcher: 2450 g
receiver: 2460 g
* 1 When the optional front protective case is mounted on one side of the transmitter and receiver, the detection distance will be shortened by 0.5 m. When installed on both sides, it is shortened by 1 m.
* 2 When the light-shielding time is 80 ms or less, in order to make the OSSD close for 80 ms or more, the response time
(OFF ON) will be later, at least 80 ms.
* 3 "Asynchronous ON" refers to the state where the transmitter and receiver are not synchronized when the optical synchronization is used (upper and lower ends)
The optical axis is in a light-shielded state) to the time required to turn on. After the transmitter and receiver are synchronized,Light and light, response time becomes longer.
* 4 350 mA at an ambient temperature of 50 to 55 degree C.
* 5 If each input other than the EDM input is on, the current consumption of each input will increase by 2.5 mA.
KEYENCE Light Curtain GL-R88HG
There is no price at present, you can Request a Quote
People who bought this item also viewed
YINGB Light Curtain NA40-20SE
YINGB Light Curtain GMNB-06-4-C
Honeywell Sensor SD5620-002
Customers frequently viewed
IWAYA DENKI Water Pump 25CJT0752
Panasonic Servo Motor MHMF022L1V2M
Honeywell Solenoid Valve VE4025B1045
ROTEN Mechanical Seal 8E5K-22-X
SANDSUN Overload Pump VA08H-760
GS Battery 6-QW-60(450)-(55D23L-KR)
Rechi Compressor 44R273A
MINDMAN Air Cylinder MCQV2-11-40-200
Mitsubishi Compressor YB645WTG
ATOS Solenoid Coil SP-COUR-230RC/10
Daikin Solenoid Valve JS-G06-4CD-75
Recent related posts
-
06/27/2020
Common faults and solutions of compressors
A compressor is a machine that compresses gas to increase gas pressure or transport gas, and is widely used. In the mining industry, metallurgy industry, machinery manufacturing, civil engineering, petrochemical industry, refrigeration and gas separation engineering, and defense industry, compressors are one of the indispensable key equipment.
-
06/14/2020
Working principle of rolling rotor compressor
Working principle of rolling rotor compressor
-
08/20/2020
What are the protection devices of industrial chillers
Industrial chiller is a kind of water cooling equipment that can provide constant temperature, constant current and constant pressure cooling equipment. The principle of the chiller is to inject a certain amount of water into the internal water tank of th ﰸ2 䀀
-
07/16/2022
Common Faults of Gear Pump
Cause: A. the rotation direction is opposite; B. the suction or discharge valve is closed
-
06/14/2020
Do summer air-conditioning rooms need air purifiers
Do summer air-conditioning rooms need air purifiers It is high temperature in summer again. Many people have disputes about whether an air purifier is needed in summer.
-
08/03/2020
Five classification functions of cold storage installation cold storage function
The refrigerated distribution center is developed based on the two needs of the rationalization of refrigerated logistics and the development of the market.
-
07/07/2020
Overnight, refrigerant leaked light, guess where is the problem
Overnight, refrigerant leaked light, guess where is the problem After receiving notification from VIP customers, they went to a concrete mixing plant in the suburbs to repair an air conditioner.
-
04/12/2024
Servo Motor Applications: a Complete Guide
Servo motors are widely used in various mechanical equipment. It has the characteristics of fast response, high precision and high reliability, and can achieve precise position control, speed control and force control.
-
09/05/2020
What are the advantages of air compressor waste heat recovery What is the effect of air compressor waste heat recovery
During the operation of the air compressor, about 80% of the input electric energy will become heat, and the remaining 20% will eventually become compressed air energy. After the electric energy consumed by the compressor is converted into heat during the working process,
-
07/11/2020
Working flow chart of screw air compressor
Working flow chart of screw air compressor In the first step, the air compressor sucks the surrounding air through the air filter to make it enter the compression host.