Keyence Sensor SR-610

07/15/2024

Solenoid Valves: Components and Types

The solenoid valve is a fluid control device, usually used in automatic control circuits. It is actually an "automatic switch" that uses an electrical signal with a smaller current and voltage to control the opening and closing of the fluid pipeline.

07/02/2020

The compressor lacks oil, so the harm is so great!

The compressor lacks oil, so the harm is so great! Compressors are complex machines that operate at high speeds. Ensuring adequate lubrication of moving parts such as compressor crankshafts, bearings, connecting rods, and pistons is the basic requirement for maintaining normal operation of the machine.

01/16/2024

Overview of Industrial Fans: Work Principle, Types, Application Areas, Importance and Selection Guide

Industrial fans are fan equipment specially designed for industrial environments, with powerful wind force and stable performance.

03/01/2021

Performance comparison between servo motor and stepping motor

As an open-loop control system, stepping motor has essential connection with modern digital control technology. In the current domestic digital control system, stepping motor is widely used. With the emergence of all digital AC servo system, AC servo motor is more and more used in digital control system. In order to adapt to the development trend of digital control, stepping motor or full digital AC servo motor is mostly used as the executive motor in motion control system. Although they are similar in control mode (pulse train and direction signal), they are quite different in performance and application. This paper compares the performance of the two.

06/29/2020

Several causes of compressor burning

06/21/2020

[Experience] What happens if the compressor suction pressure is too high and the discharge pressure is too high

[Experience] What happens if the compressor suction pressure is too high and the discharge pressure is too high Compressor suction pressure is too high, discharge pressure is too high 1. Too much refrigerant. Too much refrigerant will cause the suction pressure and discharge pressure to be too high at the same time. This is because when too much refrigerant fills the reservoir, it will occupy a part of the condenser volume, reducing the heat dissipation area and causing the condenser Poor condensation. Discharge excess refrigerant from the low-pressure side.

08/08/2020

What are the cold storage boards and how to buy them

What are the cold storage boards and how to buy them What are the cold storage boards? How do I know which specifications and models of cold storage boards are needed for the cold storage I build?

02/27/2021

Debugging method of servo motor

Before wiring, initialize the parameters. On the control card: select the control method; clear the PID parameters; let the default enable signal turn off when the control card is powered on; save this state to ensure that the control card is in this state when it is powered on again.

12/15/2022

What is a Memory Stick?

The memory stick is a memory cards product launched by Sony in 1999. Shaped like a chewing gum

02/14/2025

How to Add Oil to Semi-Hermetic Compressor: A Step-by-Step Guide

If you work in the refrigeration or air conditioning industry, you know how important it is to keep your compressors properly lubricated.