Kuebler Encoder 8.5000.6144.1000

06/23/2020

How to solve if the air conditioner is not cooling

If it is not in the cooling state, we can adjust it to the cooling mode; if the dust accumulation of the air conditioner severely reduces the cooling function, we can find professional personnel to disassemble the evaporator, fan blade, and filter. Completely clean up; if it is because no refrigerant is added, then we can add refrigerant.

07/14/2020

Requirements for the use of freezing oil

Requirements for the use of freezing oil Due to the different use occasions and refrigerants, the choice of refrigeration oil for refrigeration equipment is also different. The requirements for freezing oil< are as follows: 1. Freezing point: The temperature at which the freezing oil is cooled to stop flowing under the experimental conditions is called the freezing point. The freezing point of the refrigeration oil used in refrigeration equipment should be as low as possible (such as R22 compressors

08/19/2020

Different types of condensers have different layout requirements

There are several types of condensers: vertical, horizontal, spraying and evaporating, which should be arranged according to different types of cold storage. The installation height of the condenser must ensure that its liquid flows into the liquid reservoir under self-flow conditions.

06/25/2020

What are the three tubes of the refrigerator compressor

What are the three tubes of the refrigerator compressor 　　 1. The general refrigerator compressor has three pipe ports;

06/05/2023

13 Reasons Why LG Refrigerator Not Cooling and Solutions (The Latest Version)

With the improvement of living standards, refrigerators have become an indispensable part of family life.

08/14/2020

Reasons for internal protection of industrial chiller compressors

There is a thermal switch inside some compressors. The function of this switch is to disconnect the power supply line to the compressor motor when the temperature of the compressor exceeds the set value.

08/11/2020

Correct adjustment method of opening degree of thermal expansion valve

The expansion valve is one of the four major components of the refrigeration system. It is an important device for regulating and controlling the flow and pressure of the refrigerant entering the evaporator, and it is also the "boundary line" between the high and low pressure sides.

09/20/2023

Geothermal vs Air Source Heat Pump: Which One is Right for You?

As the world becomes more conscious about the environment, finding ways to reduce carbon emissions has become a top priority. One of the ways to achieve this is by using renewable energy sources to heat our homes.

06/29/2020

Suggestions for troubleshooting of compressor with liquid start

08/20/2020

Precautions for the use of refrigerated trucks

Refrigerated trucks are key equipment in an important link in low-temperature cold chain logistics. Refrigerated trucks work reliably and perform stable performance during refrigerated transportation.