LG LS Contactor GMC-300BF

09/10/2020

Application of okmarts.com high-pressure compressor in nickel mining

New Caledonia, Australia is one of the world's largest laterite nickel deposits. Currently, near the Goro District, a large nickel mine extraction industrial zone is under construction. The industrial zone will have complete supporting facilities, including factories, power supply, ports, streets, etc., with about 800 staff.

02/18/2021

How about the cooling effect of the air-conditioning fan

Air-conditioning fans are becoming more and more popular in summer. Of course, the price of air-conditioning fans is cheaper than air-conditioning. Of course, the cooling effect is not comparable to that of air-conditioning. So what about the cooling effect of air-conditioning fans? This is also a problem that everyone is more concerned about. In addition, the principle of the air-conditioning fan is also what you want to know. Let's take a look at the cooling effect of the air-conditioning fan with the editor, for your reference.

06/14/2020

Scroll compressor structure

Scroll compressor structure

07/23/2025

Freezer Compressor Hot: Causes and Solutions

A freezer/refrigerator is an essential appliance in most households, used to store food at low temperatures to preserve its freshness and quality.

08/14/2020

Commissioning of the water system (heat source) of the air conditioning system-equipment commissioning

Water test operation of surface cooler and spray device in air conditioning unit. Check whether the pressure difference between the inlet pipe pressure and the outlet pipe pressure of the meter cooler is within the normal range and whether there is water leakage; whether the water trap of the meter cooler is installed correctly and whether the discharge is smooth.

09/03/2020

Ingersoll Rand launches oil-free engine reengineering business

We all know that after a car has been used for a certain number of years, it needs regular maintenance to ensure safe driving, and that it can be detected and resolved early by professional manufacturers.

08/15/2020

What should I do if wall cracks appear after the cold storage is built

After the construction of the cold storage project, there may be many problems. For example, we have seen a lot of news recently. It is said that the wall cracks appeared after the construction of the cold storage

09/15/2020

Matching selection for small internal compression process design

As a traditional process type, small internal compression process equipment has been produced in the okmarts.com factory for many years. It is well received by users for its inherent advantages.

09/22/2020

Application of compressed air filter drier in mold manufacturing

Application of compressed air filter drier in mold manufacturing Conditions for manufacturing molds 1. Environmental conditions Temperature: During the whole process of manufacturing male and female molds, the same ambient temperature should always be maintained, that is, 21~28℃.

06/29/2020

Several causes of compressor burning