Littelfuse Fuse FLA30

06/14/2020

Danfoss cocuses on providing energy efficient, sustainable and smart refrigeration compressors for a varied range of commercial applications such as cold rooms

08/20/2020

Selection, installation and inspection of solenoid valves in cold storage

When selecting, the solenoid valve diameter of the same size as the pipeline should be configured according to the size of the cold storage refrigeration equipment pipeline.

09/11/2020

How to ensure the stable operation of imported bearings

Generally speaking, pay attention to the following points from the perspective of use: 1. The bearing clearance should be appropriate. If it is too large, it will cause impact, and if it is too small, it will cause poor lubrication and may burn bushes.

07/19/2024

Gas Solenoid Valves: Common Faults and Troubleshooting Methods

The gas solenoid valve is an important device used to control the flow of gas. It is widely used in household gas stoves, gas water heaters, wall mounted boilers and other equipment.

06/21/2020

Working principle of reciprocating compressor_Working process of reciprocating compressor

Working principle of reciprocating compressor<img src="{{media url=&quot;Working_principle_of_reciprocating_compressor.jpg&quot;}}" alt="" />_Working process of reciprocating compressor Working principle of reciprocating compressor 　　 Relies on periodic changes in the working volume of the cylinder to compress the gas to achieve the purpose of increasing the working pressure. (The reciprocating movement of the piston in the cylinder causes the decompression to suck the gas, and then compress the gas to a certain pressure and send it out.) The working principle of the piston compressor.

06/14/2020

Do you know question and answer with refrigeration compressors？

1. Why control the impurity content and moisture content of the compressor and air conditioning system?

08/17/2020

What is a plate heat exchanger What are its advantages and scope of application

The plate heat exchanger is stamped into a veneer with corrugated grooves of a certain regular shape from a thin metal plate (usually steel or stainless steel), and then the single pieces are assembled into the required multi-piece group.

01/17/2024

Industrial Fans: Advantages, Functions and Differences from Ordinary Fans

Industrial fans are widely used in factory workshops, logistics warehouses, basketball stadiums, stations, dairy farms, etc.

09/16/2020

Quality Reliability Test and Improvement of the Main Body of Filter Element

Abstract: Combining with the actual situation of the oil production site, through a comprehensive analysis of the manifestations of filter element failure, the filter element material, main tube wall thickness, and water hole density are used as the three main reliability factors that affect the life of the filter element on-site, and the pole is reasonably determined.

08/20/2020

Six characteristics of square cross flow cooling tower

According to industry insiders, the square cross-flow cooling tower adopts air intake on both sides, and the fans at the top allow air to pass through the fillers on both sides of the tower to exchange medium with hot water,