LS Mecapion Encoder S48-8-0512UL

08/14/2020

The refrigeration device is prone to failure and the reason

Among the failures of refrigeration equipment, failures caused by "leakage" and "blocking" are the most common.

07/08/2020

This is the key method to solve the leakage problem of fan coil

The fan coil and fresh air system is a widely used air-conditioning method. Because of its flexible layout and the ability of each room to be adjusted independently, it is commonly used in hotels, hotels, office buildings, hospitals and other buildings. However, many problems are often caused by mistakes in construction and design, and the most common one is water leakage.

09/09/2020

The influence of machining on fatigue life

The residual compressive stress introduced by shot blasting/shot peening is a percentage of the final tensile stress strength, and this ratio increases as the strength/hardness of the part material itself increases. High-strength/hardness metals are more brittle and more sensitive to surface defects. Shot blasting/shot peening will allow these high-strength metals to be used in fatigue-prone working conditions. Aircraft landing gear is usually designed with a fatigue strength of 300 ksi (2068 MPa), combined with shot blasting/shot peening.

06/29/2020

Compression ratio of American Copeland compressor

09/11/2020

Oil bath air filter zksg

In the working environment with high dust concentration in the air, the dust removal filter device used in general air compressors is mostly screen-type secondary dust removal paper and fiber material filtration.

06/26/2020

Maintenance method of refrigerator compressor without stopping

Maintenance method of refrigerator compressor without stopping The focus of non-stop compressor maintenance is on the cooling effect. If the cooling effect is normal without stopping, the fault is in the thermostat. Otherwise, it is because the system lacks fluorine and the temperature falls below the control point, which results in non-stop. When repairing,

02/16/2023

Installation and Maintenance of Gearbox

When you select gearbox model, four factors should be given comprehensive consideration.

07/06/2020

Air Compressor Market product type, technology, lubrication, application, key Players and region Analysis

The dramatic spread of COVID-19 has created a marginal impact on the global air compressor market. The sustainability of the air compressor market is mainly attributed to the significantly increasing demand from various industries such as oil & gas, healthcare, chemical manufacturing, and many others. In addition, it is expected that the demand for the air compressor will be ultimately restored after the outbreak of COVID-19.

08/20/2020

Introduction and characteristics of several throttling devices in refrigeration equipment

Among the four major components in the refrigeration system, the throttling device is one, and its function makes it have its own role.

07/14/2020

The cause of insufficient compressor displacement

The cause of insufficient compressor displacement Insufficient exhaust volume is one of the faults that compressors are prone to occur. Its appearance is mainly caused by the following reasons: 1. The failure of the intake filter: clogged fouling,