LS Servo Drive XDA-S005

09/07/2020

Year-end overhaul of compressor equipment in tire service industry

Partial maintenance of oil-water separator 　　The main function of the oil-water separator is to adjust the system pressure and ensure system lubrication. Insufficient system pressure will cause the tire changer to work weakly, and lubrication failure will cause damage to the tire changer cylinder or wasted oil injection.

06/29/2020

Several causes of compressor burning

06/06/2022

How to Troubleshoot A PC Power Supply?

When a PC suddenly goes on the fritz for no apparent reason, checking the PC power supply first may save a lot of time troubleshooting the system.

07/18/2024

How to Tell if a Sprinkler Valve Solenoid Is Bad

Maintaining a lush, green lawn requires a properly functioning sprinkler system, and at the heart of this system are the valves.

08/24/2022

Functions of the Electric Actuator

An electric actuator is a drive device that provides linear or rotary motion. It uses a certain driving energy to work under the action of a certain control signal.

07/19/2020

The principle structure, advantages and disadvantages of scroll refrigeration compressor

Principle: The scroll line pattern of the moving plate and the static plate are the same, but the phase difference is 180°C; they mesh to form a series of closed spaces; the static plate does not move, and the moving plate revolves around the center of the fixed plate with the eccentricity as the radius. When the moving disc revolves, it meshes in sequence, so that the crescent-shaped area is continuously compressed and reduced, so that the gas is continuously compressed and finally discharged from the center hole of the static disc

07/19/2020

The function and working principle of oil separator

The role of the oil separator in the chiller; In the vapor compression refrigeration system, the compressed ammonia vapor (or freon vapor) is in a high-pressure and high-temperature superheated state. Because of its fast flow rate and high temperature when it is discharged. Part of the lubricating oil on the cylinder wall is inevitably

09/08/2020

The necessity of air source system and its treatment

A system composed of equipment that generates, processes, and stores compressed air is called an air source system. A typical air source system consists of the following parts: air compressor, rear cooler, filter (including pre-filter, oil-water separator, pipeline filter, oil removal filter, deodorization filter, sterilization filter) Etc.),

08/26/2020

【Special topic】Summary and development of scroll refrigeration compressor technology

　1. There is no reciprocating mechanism, so the structure is simple, small in size, light in weight, few parts (especially few wearing parts), and high reliability;

08/16/2020

Causes and solutions of noise from air-cooled chillers

When the air-cooled chiller is in use, because in the initial stage of production, the company conducts all-round treatment for the air-cooled chiller, so it will not cause high noise problems.