MAC3 Switch MAC3-1M

09/11/2020

Bearing according to the type of rolling element

Bearings are classified according to the types of rolling elements: 1. Ball bearing: the rolling elements are balls 2. Roller bearing: the rolling element is roller

06/25/2020

Basic knowledge of air energy

At present, the most commonly used vapor compression heat pumps, compressors, evaporators, condensers, and throttle valves are the four main components. Other auxiliary components include fans, four-way valves, liquid storage tanks, gas-liquid separators, copper pipes, and Protectors and electronic control parts used to ensure the normal operation of the machine, etc. Direct-heating models also include a water flow regulating valve. Schematic diagram of commercial air source heat pump system

09/03/2020

Energy-saving storm swept the pharmaceutical industry, air compressor transformation is imperative

In the current implementation of energy conservation and environmental protection policies and concepts, the pharmaceutical industry also pays attention to low energy consumption, resource conservation and lower production costs in the operation process.

09/07/2020

Why is air humid after compression

We all know the importance of compressed air drying. This is a critical step in the compressed air process. If you skip this step, it may cause a large amount of water to accumulate in your system. So why does compressed air get wet?

08/19/2020

What needs to be tested for stable operation of industrial chillers

Different companies have different requirements for low-temperature environments. Therefore, when choosing an industrial chiller,

09/03/2020

Selection of air inlet filter cartridge

The selection of the inlet filter cartridge actually involves many aspects, not only the cartridge itself, but also the entire system design. Therefore, when selecting a filter cartridge, you should refer to the processing air volume, surrounding environment, pre-filtration, etc.:

01/24/2023

What is a Pressure Transmitter?

A pressure transmitter is a device that converts pressure into pneumatic or electric signals for control and remote transmission.

08/19/2020

The reason for the large power consumption of the chiller

As the evaporation temperature decreases, the compression ratio of the compressor increases, and the energy consumption per unit of cold production increases. So, what are the reasons for the high power consumption of the chiller?

06/29/2020

Compression ratio of American Copeland compressor

06/14/2020

The difference between single and twin screw compressors is reflected in the following 6 aspects

The difference between single and twin screw compressors is reflected in the following 6 aspects