Mitsubishi Compressor DNB28FANMT

09/20/2023

Geothermal vs Air Source Heat Pump: Which One is Right for You?

As the world becomes more conscious about the environment, finding ways to reduce carbon emissions has become a top priority. One of the ways to achieve this is by using renewable energy sources to heat our homes.

09/14/2020

Maintenance steps and methods of G series oil and gas separator

1. Disassemble all connecting pipelines connected to the cylinder head and clean the surface dust. 2. Take out the oil return pipe (air compressors below GA90 cannot be removed).

09/08/2020

Energy-saving way of air compressor inverter

The energy-saving measures for frequency converters mainly reflect the use of current fans, pumps, and hoists. In order to ensure the reliability of production, all kinds of production machinery have a certain margin when they are equipped with power drives.

07/31/2020

What kind of equipment is generally used in cold storage How to select the refrigeration equipment

The cost of cold storage with a refrigeration capacity of less than 60kw is relatively large. It is generally suitable for small cold storage and air conditioning units. The cost of such small cold storage within 100 square meters ranges from 30,000 to 100,000.

07/01/2020

What are the precautions for compressor operation

What are the precautions for compressor operation If the compressor operation is wrong, it will affect the operation. Therefore, in the usual maintenance of compressors, we have to follow many rules, or precautions. What are the matters we need to pay attention to the compressor? Let's take a look.

06/29/2020

How the compressor works

07/19/2020

Refrigerant filling operation method of centrifugal chiller

The centrifugal chiller refrigeration compressor after completing the work procedure of filling the frozen lubricating oil, the next step should be the refrigerant filling operation, the method of operation is: (1) using copper pipes or PVC (polyvinyl chloride) pipes One end is connected with the filling valve at the lower part of the evaporator, and the other end is connected with the top joint of the refrigerant storage tank to ensure good sealing.

07/22/2022

What is a Water Pump

A water pump is an electromechanical machine that is used to increase the pressure of water to move it from one point to another.

03/02/2021

Related technical terms

1.Positioning or residual torque: when there is no current passing through the winding, the torque required to make the output shaft of the motor rotate. 2.Driver: an electrical control device used to run the stepping motor. This includes power supply, logic programmer, switching element and a variable frequency pulse source which determines the step rate. 3.Dynamic torque: the torque produced by the motor at a certain step rate. The dynamic torque can be expressed by PULL IN torque or PULL OUT torque.

07/23/2020

Share┃Causes and solutions for ice block, dirty block, and oil block

Foreword: The blockage of the refrigeration system is mainly caused by the ice blockage, dirty blockage or oil blockage of the capillary tube, or the dirty blockage of the dryer filter.