Mitsubishi Servo Motor HC-MF13

07/30/2020

About inverter air conditioner fault repair skills

Today I will share with you the maintenance ideas and cases about the failure of the inverter air conditioner that does not heat but can cool. If you like, you can like it and collect it, thank you!!!<br></br>

06/29/2020

How the compressor works

04/12/2024

Servo Motor Applications: a Complete Guide

Servo motors are widely used in various mechanical equipment. It has the characteristics of fast response, high precision and high reliability, and can achieve precise position control, speed control and force control.

06/22/2020

What's wrong with air conditioning and cooling

1.The air conditioner lacks freon. Under such circumstances, the air conditioner cooling effect will be poor. 2. If there is a lot of dust and dirt in the filter, it will affect the heat dissipation effect, which will affect the cooling. 3. The outdoor temperature is too high, and it is difficult to lower the temperature by turning on the air conditioner at home. 4. Voltage problem, the power supply voltage of normal air conditioner is 220V, but if it is lower than 220V, the cooling effect will be greatly affected. Summer is coming soon, and the weather is getting hotter. But if the cooling effect of the air conditioner is not good after turning on, what is going on? Is there any good solution? <img src="{{media url=&quot;magefan_blog/What_s_wrong_with_air_conditioning_and_cooling.jpg&quot;}}" alt="" />

07/31/2020

What are the specific operation methods for maintenance of screw compressors in cold storage

Before the cold storage screw compressor must be overhauled, if possible, unload the slide valve to the "0" position, shut down normally, and cut off the power supply.

02/25/2020

Why is the air conditioner not cooling

1.Check whether the compressor is working normally. If the compressor is broken, the air conditioner cannot start normally and there will be no cooling effect. 2. There is not enough refrigerant in the air conditioner. At this time, you need to add Freon, and the time for adding Freon can be very long. 3. The air conditioner itself has quality problems and the electrical components have failed. In this case, you need to find a master to repair it.

08/14/2020

What to pay attention to when building a chiller room

What should I pay attention to when building a chiller room? The machine room is to allow the chiller to have an independent and stable operating environment, avoid wind and sun, and various debris or dust to damage the unit

11/15/2024

Understand VFD Better by Wiring the Main Circuit and Control Circuit

1.1 Open the cover by squeezing the grooves on both sides of the VFD(variable frequency drive), remove the wire baffle, connect the terminals R, S, T to the power, connect the terminals U, V, W to the motor, and connect the earth wire at the ground symbol.

03/13/2021

Working mode of servo driver

The working modes of servo driver are: open loop mode, voltage mode, current mode (torque mode), IR compensation mode, Hall speed mode, encoder speed mode, tachometer mode, and analog position loop mode (ANP mode). (not all of the above modes exist in all models of drives)

09/10/2020

Causes of Compressor Common Failures and Countermeasures Analysis

Abstract: During the operation of the compressor, some failures and even accidents will inevitably occur. A fault refers to an abnormal condition that occurs during the operation of the compressor, which can be restored to normal operation once the compressor is eliminated, while an accident refers to a damage situation. The two are often related, and if the fault is not eliminated in time, it will cause a major accident.