MTL Encoder MES-20-300P

06/29/2020

Introduction of measures for compressor pressure protection

Introduction of measures for compressor pressure protection Measures for compressor pressure protection include the following: 1. Control of suction and exhaust pressure When the compressor is running, due to the system or the compressor itself, the discharge pressure may be too high or the suction pressure may be too low. For this reason, the suction and discharge pressures need to be controlled.

08/09/2020

Can you answer these common basic knowledge questions about refrigeration compressors?

1. Why should the compressor run continuously for at least 5 minutes, and stop for at least 3 minutes after shutting down before restarting?

09/04/2020

Oil filter of air compressor oil circuit component function description

The oil filter is a paper filter whose function is to remove impurities in the oil, such as metal particles, oil deterioration, etc., with a filtration accuracy of 5-10μ, and it has a perfect protective effect on the bearing and rotor.

08/02/2020

Introduction to the knowledge of central air conditioning vents

Introduction to the knowledge of central air-conditioning vents The correct installation and design of central air-conditioning is very important.

06/29/2020

What is the cause of compressor pipeline vibration

07/14/2020

Requirements for the use of freezing oil

Requirements for the use of freezing oil Due to the different use occasions and refrigerants, the choice of refrigeration oil for refrigeration equipment is also different. The requirements for freezing oil< are as follows: 1. Freezing point: The temperature at which the freezing oil is cooled to stop flowing under the experimental conditions is called the freezing point. The freezing point of the refrigeration oil used in refrigeration equipment should be as low as possible (such as R22 compressors

08/15/2020

Accurate selection of industrial chillers needs to meet 6 conditions

The accurate selection of industrial chillers needs to meet six conditions. When we need to purchase industrial chillers, the selection becomes an important issue for us.

06/14/2020

Why do central air-conditioning compressors often fail？

A little common sense in the air conditioning industry knows that whether it is cooling or heating, the compressor plays a key role, which can be said to be the heart of air conditioning. The configuration of the compressor is very complicated, and it is 器2䀀
ￜ皥
䖒皦즠Ʋ奌ི㲈Ʋ
䌁皦
ᮔDž༬皧奖ིЀ呄ᠾ鹨់༹皧
ࠄ
00령ꐱ댁珵뛐珵Љ
䕄ྦ￿￿뤂ᐱ뚜珵ᴴᏩ呄ᠾ퍘ᒥ鹨់ᩄꋔྦ
瑉浥巠皱㙲皦抐皱巠皱੨皦柘皱ￜ皥
ب巠皱㙲皦忈皱੨皦柘皱
즠Ʋǜ勁皦즠ƲبǜV /

07/27/2020

How to maintain car air conditioners in winter The master will give you a comprehensive explanation, and you can understand it in 2 minutes!

Summer is coming, and air conditioning is an indispensable product for everyone. In the hot summer, life without air conditioning is really impossible.

08/21/2020

How to operate the chiller correctly

For an operating chiller. Environmental conditions, the load has become a fixed value. At this time, the condensing heat load is also a fixed value. It is stipulated that the temperature difference between the inlet and outlet water is 5℃