The core problem of compressor oper
The core problem of compressor oper
Choose 2.5 flat or 4 flat wire for household air conditioner Listen to Fudge
Many people are decorating new homes for the first time. If you don’t understand circuits and wires, you will suffer a lot. You can only listen to what the electrician says. Air-conditioning is a large power-consuming item in the home, so basically it is wired separately. During the decoration, some people said to choose 2.5 square meters, some people said to choose 4 square meters, so which one is really practical? You must pay more attention in the early stage, otherwise it will be too late if you get smashed by the black heart electrician.
The air conditioners used in our homes are generally split air conditioners or central air conditioners, and the voltage is basically 220V. The large power consumption of the air conditioner is mainly due to the long working hours, and the actual power is not very large. Generally speaking, the on-hook air conditioner at home does not exceed 2 horses at most, and the limit power of the 2.5-square wire is 5800W, so no matter how the on-hook air conditioner consumes power, it will not exceed this power, then 2.5 squares is sufficient. Central air conditioners and cabinet air conditioners are generally 2.5 and 3 horses or more, and 4 square wires are required.
But now many families are willing to choose 4-level wires, mainly because they are fooled by the black-hearted decoration workers, wanting to make more profits. We Chinese people like to follow suit and think that what is expensive is good. Since rich people do this, there must be "reason" for it.
There is also the fact that the building materials industry is too deep now, fake products are prevalent, and genuine products are shrinking. Therefore, everyone tries to choose "high and not low" in their choices. Otherwise, it will be too late to wait until the circuit is completed and then there is a problem.
And the line is not as big as possible. The 4-level line is difficult to construct. In the later stage, it is very easy to cause circuit safety accidents due to problems such as tight line pressure. So my suggestion is that, in the end, the on-hook is generally 2.5 square meters, while the cabinet air conditioner is 4 square meters.
