How should a window type explosion-proof air conditioner be installed

How should a window type explosion-proof air conditioner be installed

With the emergence of various types of explosion-proof air conditioners, the current window-type explosion-proof air conditioner market is getting smaller and smaller. Here we only have a simple understanding of the installation of explosion-proof window air conditioners.

　　 Generally speaking, we can briefly summarize the entire installation process of an explosion-proof window air conditioner as follows: choose a location and make a bracket. Punch through the wall (window) hole, install the bracket, put the body, seal the gap, prepare the power supply, test drainage, and test run.

　　 Below we take 1HP BKC-25 type explosion-proof window air conditioner as an example to make a brief description.

　　 choose installation location:

The explosion-proof window air conditioner should be kept away from the door as far as possible, and the installation on the window sill is firm, not easy to cause the resonance of the window, which is beneficial to reduce noise, and the installation and future maintenance are easy and convenient; the left, right and upper part of the air conditioner and the wall Ensure that the space between the roof and the roof is greater than 10cm to facilitate air circulation; in order not to affect heat exchange, there should be no obstacles within 50cm of the wind direction of the air conditioner. The installation height of Qiyun above the ground is generally 95~i80cm.