How to solve the internal arcing of Taikang compressor According to the survey data, most customers of Taikang Compressor have reflected the internal arc fault of the compressor. How to solve this kind of fault? Let's take a look together. First of all, we must know clearly that the internal arcing fault of Taikang compressor accounts for 20% of all faults of Taikang compressor. This kind of fault is the typical result of electric power supply or electric shock in vacuum state of the motor.
In this case, it will cause very serious consequences: sparks may occur between the terminals or between the terminals and the Taikang compressor casing, and may also occur inside the coil, which is called the corona effect. Therefore, as a supplier of Taikang Compressors, we would like to strongly advise users that Taikang Compressor can only supply power after the vacuum is broken, even for electrical shock tests. In addition, for process safety, it is recommended to charge refrigerant (after the system is evacuated) and check the pressure with a pressure gauge, which should be higher than atmospheric pressure. In fact, the refrigerant is charged from the discharge side (the "high pressure" side of the reciprocating compressor) or from the suction side of the rotary compressor or elsewhere (high pressure in the casing), and the refrigerant gas cannot have enough time to make the motor area Supercharged. In summary, when using Taikang compressors, as a customer, never supply power to the compressor under vacuum, and at the same time, never apply electrical shock before the vacuum breaks. Otherwise, once the Taikang compressor fails, it will be seriously damaged and will not work!
/avs58i-011aarhgn-0012.jpg)
