How to solve the problem of high radiation in the refrigera
tor
Although the radiation of the refrigerator cannot be said to be large, the radiation protection cannot be ignored. Many people think that although the electric refrigerator has radiation, the radiation is not large, and it should not have an impact on the human body. In fact, the radiation of the refrigerator is similar to the radiation of the computer desktop chassis, and the radiation is different in different parts.
The radiation of the computer case is as follows: the average front radiation is 0.17 T; the central radiation of the host operation panel is slightly stronger, reaching 0.26 T at a distance of 0.03 meters from the front of the chassis; the radiation from the side of the host is 0.29 T; the center of the left side of the chassis is 0.03 meters away Radiation is 0.23 T; the radiation behind the chassis reaches 0.46 T. (T is the unit of magnetic induction).
It is understood that the radiation outside the front door of a general freezer is about 0.13 T, and about 0.16 T when the door is opened. However, the electromagnetic radiation emitted by the cooling pipelines on both sides and underneath of the refrigerator is dozens of times higher than that of the front front, and even some can reach hundreds of times. In addition, when there is too much dust in the heat dissipation pipe of the freezer, the electromagnetic radiation emitted will become larger.
The main radiation protection methods of refrigerators are: 1. First of all, do not put the refrigerator in the bedroom and living room where people will stay for a long time, because the refrigerator works day and night and is always energized, so whether it is started or running, There is radiation. If it is placed close to the human body such as the living room and bedroom, people will be affected by electromagnetic radiation for a long time. Over time, it will inevitably affect health. Therefore, it is best to put the freezer in the kitchen and other places where you do not often stay.
2. When the freezer starts, try to avoid opening the door and storing food. In addition, because there is too much dust in the heat dissipation pipeline, the radiation of the refrigerator will increase, so we should always try to clean the dust attached to the heat dissipation element.
3. If you place one or two pots of cactus next to your freezer, it can help the human body absorb as little as possible the radiation released by the freezer. Because cacti grow in places with strong sunlight, they have a particularly strong ability to absorb radiation. In addition, plants such as cactus, cactus, and celestial ruler can also protect against radiation, absorb carbon dioxide and release oxygen.
How to solve the problem of high radiation in the refrigerator
Recent related posts
-
08/02/2020
How to solve the problem of high radiation in the refrigerator
Although the radiation of the refrigerator cannot be said to be large, the radiation protection cannot be ignored. Many people think that although the electric refrigerator has radiation, the radiation is not large, and it should not have an impact on the human body.
-
08/02/2020
How to distinguish between screw refrigeration compressor and piston refrigeration compressor Distinguish from type
Screw refrigeration compressor and piston refrigeration compressor are both positive displacement compressors, and screw refrigeration compressor is a new type of high-speed refrigeration compressor.
-
08/02/2020
How to determine the refrigerant leakage of the air conditioning system Only need these six steps
Shut down and unplug the air conditioner (to prevent danger during the inspection process), and connect a pressure gauge to the large valve. Observe the static pressure.
-
08/02/2020
How to choose the right refrigerant for cold storage
The nature of the refrigerant will directly affect the type, structure, size and operating characteristics of the refrigerator, as well as the form, equipment structure, and economic and technical performance of the refrigeration cycle.
-
08/02/2020
How to blow pollution after installation of cold storage refrigeration system
The reason for blowing dirt after the refrigeration system is installed is that during the installation or maintenance of the refrigeration system, there will inevitably be welding slag, rust, oxide scale and other impurities in the refrigeration system.
-
08/02/2020
From the perspective of horsepower and energy efficiency ratio, central air conditioners should be selected like this!
The choice of central air conditioner for decoration has become a market trend. How to choose a suitable central air conditioner, choose a duct machine or a multi-line group
-
08/02/2020
Equipment selection for cold storage design and installation temperature and size are critical
The equipment selection of the cold storage design and installation is related to the actual operation of the cold storage after the completion of the cold storage.
-
08/02/2020
Do you know the key "3, 5, 8" in the installation of central air conditioning fluorine system?
Central air-conditioning creates a high-quality home life for us. Before installing central air-conditioning, we must make preparations for purchase, design and installation in advance, so as to be well aware of and avoid blindness.
-
08/02/2020
Correctly distinguish between two-in-one supply and three-in-one supply for central air conditioning
To put it simply, the so-called "dual supply" is to use an air energy heat pump system to provide two combined functions of "hot water + heating" or "heating + refrigeration"; "triple supply" is to provide "air conditioning + floor heating + Three combined functions of "hot water".
-
08/02/2020
Characteristics of R12, R22, R407C refrigerants in cold storage
don’t know if you still remember that okmarts.com wrote "How to Choose Refrigerant for Cold Storage Design" some time ago. Today okmarts.com will introduce several different cold storage refrigerants in detail, namely R12, R22, R407C
Customers frequently viewed
IWAYA DENKI Water Pump 25CJT0752
Panasonic Servo Motor MHMF022L1V2M
Honeywell Solenoid Valve VE4025B1045
ROTEN Mechanical Seal 8E5K-22-X
BANDO Belt T5-780-18
Nemicon Encoder OSS-006-2HC-24-050-00E