Points to note when installing Taikang Compressor The air conditioner and cold storage can provide refrigeration without the credit of fluorine and compressor. Taikang Compressor is a common air conditioner and cold storage compressor with good quality and guaranteed. In order to ensure the normal operation of the Taikang compressor when it is used, it must first be carried out in strict accordance with the requirements during installation. Taikang Compressor The following are the correct installation steps of Taikang Compressor, as well as some problems and conditions you may encounter during the installation process, there are many precautions, as follows:
① All accessories such as the cooler, fan blades, motor, and pulley in the Taikang compressor should be clean and firmly installed, and should not be loosened due to vibration during operation. ② The automatic blowdown device of Taikang compressor must be installed correctly. Only in this way can the dirt be led to the outdoor, and it should be noted that it should not be discharged in the cable trench. ③ The crankshaft and bearing bush of Taikang compressor should be well fixed, the position of the pin must be appropriate, and also pay attention to ensure that the oil level in the cylinder should be on the marked line position. ④ When installing the Taikang compressor, the air filter should be clean and unobstructed, the suction valve and the exhaust valve should be intact, the direction of the valve plate should not be reversed, and the sealing of the contact surface between the valve plate and the valve seat should be tight. ⑤ Carefully check the inner wall of the cylinder of Taikang Compressor. In addition to ensuring cleanliness, there must be no signs of local wear. The cylinder head gasket should be complete and tight. The piston and spring expansion ring of the cylinder should be intact and intact. During the movement of the piston, the expansion ring should be close to the cylinder wall. Taikang compressors and other equipment have specific lubricants when they are usually maintained. For example, the lubricants used for cylinders should meet the technical requirements of the products, and the cylinder oil heating device should also be intact. The above are some precautions about the installation of Taikang compressor. If you will not install it correctly, don’t be reckless. This will only make your compressor unable to operate normally, even if it can run. There will be trouble, very troublesome.
