The importance of air compressor gas storage tank in post-processing equipment

The importance of air compressor gas storage tank in post-processing equipment

When it comes to air compressor storage tanks, we have to mention air compressor post-processing equipment, so what is air compressor post-processing equipment? Here is an explanation for everyone.

The refrigerated dryer is a compressed air dewatering and purification equipment made using the principle of freezing. After the compressed air from the upstream pipe network contains a large amount of saturated water vapor after cooling treatment, most of the vapor is condensed into liquid droplets, which are separated after the vapor and water , The dry compressed air obtained can meet most industrial needs. Unlike the adsorption dryer, the refrigerated dryer can remove part of the oil mist in the compressed air in the process of removing water. Its pre-treatment requirements for compressed air are not as strict as adsorption dryers. The refrigerated dryer has become the model of choice for air compressor station purification equipment in all walks of life due to its reliable work, convenient management and operating costs.

　　 The air compressor tank is an important equipment in the air source system. The installation of the air tank usually has the following purposes:

　　● The stored gas volume can solve the problem that the gas consumption is greater than the gas supply volume that may occur in a short time in the system. On the other hand, it can be used as a temporary emergency when the air compressor fails or other unexpected events (such as power failure);

　　● Eliminate or weaken the pulsation of the output air flow of the piston air compressor, stabilize the air source pressure, and ensure the continuous and stable output air flow;

　　● Provide a larger system capacity, extend the air compressor "start-stop" or "load-unload" cycle period, and reduce the switching frequency of electrical equipment and valves.

　　● To further cool the air, separate and remove impurities such as moisture and oil in the compressed air, reduce the workload of other post-processing equipment downstream of the pipe network, and enable various types of gas equipment to obtain the required quality of gas source.

　　 In addition, the air storage tank that comes with the small air compressor is also used as the mounting base for the air compressor body and other accessories....