What happened to the refrigerator compressor

What happened to the refrigerator compressor What happened to the refrigerator compressor    The sound of "popping" made by the refrigerator, which is a kind of sound caused by the thermal expansion and contraction in the box, is normal. The sound of “Dangdang Dang" appearing in the refrigerator is often generated when the compressor starts or stops, sometimes once, sometimes two or three times, which will not affect its normal use. If there is a collision sound of the vibration of the "ping-pong" metal tube in the compressor of the refrigerator, this is the sound of the high-pressure muffler tube breaking, and it should be repaired in time. If there is a "booming" sound in the refrigerator, and the sound is made in the compressor of the running refrigerator, this is the sound of the broken or dislocated suspension spring in the compressor, and it should be repaired in time. The sound of "clucking" or "tapping" appearing in the refrigerator is accompanied by obvious vibration of the compressor. This is because the compressor parts are damaged or loose, so that the impact occurs and should be repaired in time. How to solve the problem of refrigerator compressor Reinforce the pipeline and the box body firmly. Check whether the reinforced part between the outer pipeline and the box body is loose, so as to avoid resonance when the compressor is working. Therefore, the outer pipeline must be fixed, and bolts should be added with spring washers to prevent loosening. The compressor base should be firm. If the compressor is pressed tightly by hand, the noise will be significantly reduced, and the noise will increase when the hand is lifted up. Generally, the compressor base fixed vibration damping rubber pad is unevenly loaded or the bolts are loose, and the compressor bottom plate is not Due to the firmness, the bolts of the connecting parts should be adjusted and tightened and the washers that have lost elasticity should be replaced. The rubber block is used to suppress the vibration of the tube. If the refrigerator is noisy during use, the tire of the bicycle can be taken and cut into a circular shape with a diameter of 30 mm. A circular hole with a diameter of about 5 mm is cut in the middle and then cut from the outer edge to the center Click to stick the rubber block to the tube. When the refrigerator compressor is running, touch the pipe with your hand. You can put a few rubber blocks on any pipe that feels jitter. A refrigerator needs 10 to 20 pieces, and the noise will immediately drop. This is because the rubber block suppresses the "resonance" generated by the vibration of the pipe. Elevate the four corners of the refrigerator properly, place the refrigerator at a height of 3 to 6 cm and adjust the balance of the four corners to increase the air convection space at the bottom of the cabinet. In this way, the compressor noise and other noises from the lower part come out from the bottom of the box body, reducing the noises from the sides and upper part of the refrigerator. What to do if the refrigerator compressor makes an abnormal sound    The temperature has gradually recovered, and the utilization rate of refrigerators has been greatly increased. Many refrigerators in the homes of citizens are "overwhelmed", and some problems have begun to occur. One of them is the abnormal sound of the compressor. Why is this?

The expert explained that the structural feature of the refrigerator's fully enclosed reciprocating compressor is that the compressor and the motor are installed in the same casing. Its structure is very compact and the assembly is also very delicate. Therefore, special care must be taken in action and handling, otherwise it will be easy to produce Various abnormal sounds.

   1. For the external vibration sound of the compressor For the external vibration sound of the compressor, such as the collision of the refrigeration pipeline, improper installation of the joint, the compressor base like the talent, cracked, deformed or loose bolts of the film, as long as it is carefully checked, move the position of the collision pipe or remove the talent. Cracked compressor base rubber rolls can be eliminated by reinstalling new parts.

   2. The buzzing sound of the compressor    For the buzzing sound of the compressor, unplug the cold box immediately, use a multimeter to measure the pressure or measure the three terminals of the motor. If the power supply voltage is lower than 180V and the motor winding is not burned, you can wait for the power supply voltage to return to normal before re-using it; if one phase of the motor winding is burned, you should send it to a professional warranty department for repair.

   3. For the "click" sound from the compressor For the "tapping" knocking sound from the inside of the compressor, such as loose or damaged parts in the body, the valve plate is tight due to the loosening of the screw of the valve disc, the valve disc rupture, and the exhaust pipe and the housing touch, Failures such as uncoupling or breakage of the support spring should also be sent to a professional repair department for repair or replacement.

Recent related posts

Customers frequently viewed

Submitted Successfully
Submission Failed