What kind of bearing cannot continue to be used and needs to be replaced with a new bearing
To determine whether the bearing can be used again, it should be decided according to the bearing damage level, mechanical performance, importance, operating conditions, inspection cycle and other related factors.
However, if the following defects are found during the inspection, the bearing cannot continue to be used and needs to be replaced with a new bearing.
A. Any one of the inner ring, outer ring, rolling element, and holding frame is cracked or chipped.
B. Any one of the rings and rolling elements is broken.
C. There are obvious scratches on the rolling surface, ribs and rolling elements.
D. Or the rivets are obviously loose. The holding frame is obviously worn out.
E. There are rust or scars on the raceway surface and rolling elements.
F. There are serious indentations or bruises on the raceway surface and rolling elements.
G. There is obvious creep on the inner diameter surface of the inner ring or the outer diameter surface of the outer ring.
H. Discoloration due to overheating.
I. Bearing seals or dust caps filled with grease are seriously damaged.
What kind of bearing cannot continue to be used and needs to be replaced with a new bearing
Recent related posts
-
09/06/2020
What kind of bearing cannot continue to be used and needs to be replaced with a new bearing
To determine whether the bearing can be used again, it should be decided according to the bearing damage level, mechanical performance, importance, operating conditions, inspection cycle and other related factors.
-
09/06/2020
The harm of poor quality air filter element to screw air compressor
Inferior air compressor air filters are those that are relatively rough in workmanship and have the same filtering effect. You must know that air filters are the protective umbrella for the heart of the screw air compressor (screw host). If the picture is cheap, use inferior air compressors.
-
09/06/2020
The difference between variable frequency air compressor and industrial frequency air compressor
The difference between variable frequency air compressor and industrial frequency air compressor: 1. The pressure is stable:
-
09/06/2020
Six manifestations of the development of oil-free air compressors in the next ten years
The next ten years will be a period of opportunity for the development of China’s manufacturing and air compressors. More domestic air compressor companies with strong innovation capabilities will produce oil-free,
-
09/06/2020
Several suggestions for the field of traditional compressed air purification
In the past, when building a compressed air system, people often ignored the impact of pollutants in the compressed air on the system, and only considered the simple economic factors such as initial investment and operating energy costs,
-
09/06/2020
Selection and verification of pressure vessel safety accessories
1 Pressure vessel and its safety accessories Pressure vessel is a closed device, not only carries a certain pressure, but usually contains gas or liquid inside, and metal and non-metal materials are common. There is a large pressure difference between the inside and outside
-
09/06/2020
Main properties of permanent magnet materials commonly used in motors
Permanent magnet materials commonly used in motors include sintered magnets and bonded magnets. The main types are AlNiCo, ferrite, samarium cobalt and neodymium iron boron.
-
09/06/2020
Filter structure and material selection
Generally speaking, a filter refers to an accessory that filters impurities or gases through filter paper; according to different filtering functions, it can be divided into: oil filter, fuel filter, air filter, air conditioning filter Wait
-
09/06/2020
Discussion on air filtration detection technology
With the increase of smog in the north, filtration and purification industries such as air purification and fresh air have ushered in a new spring, which also detonated the entire filter industry.
-
09/06/2020
Application advantages of micro heat adsorption dryer
With the advancement of science and technology and the improvement of people's living standards, in the fields of industry, food and medicine, the requirements for compressed air quality are getting higher and higher, and all walks of life have corresponding requirements for compressed air quality.
Customers frequently viewed
IWAYA DENKI Water Pump 25CJT0752
Panasonic Servo Motor MHMF022L1V2M
Honeywell Solenoid Valve VE4025B1045
ROTEN Mechanical Seal 8E5K-22-X
SCHNEEBERGER Linear Guideway BMB35-G0V0
Siemens Contactor 3RT1064-6AU36
KOBELCO Welding Wire DW-H350