Nidec Fan A34350-55C

12/23/2020

Air separation equipment and industrial gas are dependent on each other

Air separation equipment is used to produce high-purity gas and is one of the core equipment in the industrial field. The complete set of air separation equipment uses cryogenic rectification separation technology to separate air to produce high-purity oxygen, nitrogen, argon and other gases, which are widely used in various fields of the national economy.

06/14/2020

Danfoss cocuses on providing energy efficient, sustainable and smart refrigeration compressors for a varied range of commercial applications such as cold rooms

07/23/2020

9 usage details that affect the life of air conditioners

1. Clean the air filter frequently. Usually clean once every 2-3 weeks. The steps are: remove the panel; pull out the air filter; clean the air filter. Rinse the air filter under the tap. Since the filter is made of plastic frame and polyester silk, it should not be cleaned with hot water above 40℃ to prevent shrinkage and deformation.

03/13/2021

Working mode of servo driver

The working modes of servo driver are: open loop mode, voltage mode, current mode (torque mode), IR compensation mode, Hall speed mode, encoder speed mode, tachometer mode, and analog position loop mode (ANP mode). (not all of the above modes exist in all models of drives)

06/14/2020

Reliability-up (Mechanical Drive Steam Turbines)

Mechanical Reliability-up (Mechanical Drive Steam Turbines)

09/08/2020

Analysis of the advantages and disadvantages of oil-free screw air compressor

The oil-free air compressor is composed of screw head, electric motor, oil and gas separation barrel, cooling system, air conditioning system, lubrication system, safety valve and control system.

08/07/2020

What is a built-in air conditioner What should I do if the embedded air conditioner leaks

The embedded air conditioner is a very good air conditioner. The biggest difference between the embedded air conditioner and the ordinary air conditioner is the installation form of the embedded air conditioner.

06/30/2020

Lubrication method for air conditioner compressor fault maintenance

Lubrication method for air conditioner compressor fault maintenance The specific conditions of the lubrication method for air conditioner compressor fault maintenance are as follows:

07/08/2020

This is the key method to solve the leakage problem of fan coil

The fan coil and fresh air system is a widely used air-conditioning method. Because of its flexible layout and the ability of each room to be adjusted independently, it is commonly used in hotels, hotels, office buildings, hospitals and other buildings. However, many problems are often caused by mistakes in construction and design, and the most common one is water leakage.

12/08/2023

Air Cooling and Liquid Cooling: Introduction to Data Center Cooling System Technology

Most of the electrical energy consumed during the operation of electronic information equipment in the data center is converted into waste heat.