NKK Switch M2013ES1W01

07/04/2020

The compressor lacks oil, so the harm is so great!

The compressor lacks oil, so the harm is so great! Compressors are complex machines that operate at high speeds. Ensuring adequate lubrication of moving parts such as compressor crankshafts, bearings, connecting rods, and pistons is the basic requirement for maintaining normal operation of the machine.

06/29/2020

Compression ratio of American Copeland compressor

08/20/2020

Six characteristics of square cross flow cooling tower

According to industry insiders, the square cross-flow cooling tower adopts air intake on both sides, and the fans at the top allow air to pass through the fillers on both sides of the tower to exchange medium with hot water,

07/24/2020

Comparison of working principle of single screw and twin screw refrigeration compressors

Twin-screw refrigeration compressor is an energy-adjustable oil-injected compressor. Its three continuous processes of inhalation, compression and exhaust are realized by periodic volume changes when a pair of intermeshing female and male rotors rotate.

08/03/2020

7 practical heat exchanger technical questions

Answer: In the most common partition type heat exchanger, there are mainly two heat transfer methods: conduction and convection.

07/31/2020

How to switch freely between cooling, heating and dehumidification modes

Nowadays, the air conditioner has become a must-have household appliance for every household. In different seasons, for us, we can adjust the temperature with our fingers and realize the switching of different functions.

08/15/2020

The layout principle of Freon refrigerant pipeline

The main feature of Freon refrigerant is that it dissolves with the lubricating oil. Therefore, it must be ensured that the lubricating oil from each refrigeration compressor can return to the refrigeration compressor after passing through the condenser,

03/01/2021

Matters needing attention

1.Oil and water protection of servo motor 1) The servo motor can be used in the place that will be attacked by water or oil drops, but it is not completely waterproof or oil-proof. Therefore, the servo motor should not be placed or used in the environment of water or oil invasion. 2) If the servo motor is connected to a reduction gear, the oil seal should be filled when using the servo motor to prevent the oil of the reduction gear from entering the servo motor 3) The cable of servo motor should not be immersed in oil or water.

08/26/2020

Three common pollutants and detection methods of air compressor lubricants

Lubricating oil is known as the blood of the equipment, flowing inside the equipment, and has the functions of lubricating, reducing wear, cooling, cleaning and preventing rust.

08/07/2020

Air conditioning system tuyere arrangement spacing

Air conditioning system tuyere arrangement spacing<br></br> Fan coil plus fresh air air conditioning system<br></br> 　　1) Arrangement of fan coil units: When there are requirements for the number of units, arrange them as required. When there is no requiŒﰨ2䀀湠疌VǜV
㠠ư㠠ư㠠ư類湠疌᾵疀ꝆဠЀ￾￿￾￿譐ဧ湠疌
褅畿㠠ư鬧쑽ݗ盎律࡜盎Љ
䕄ொ�ိ練ॡ盎肰畿ᗘႸ
ꋔொ
練