NOHKEN Level Meter R7-X

Suitable for plastic rationalization equipment and grain processing machines. If there are no particles around the paddle, the main shaft and the paddle
connected to the motor through the sliding mechanism rotate at a low speed due to the rotation of the motor. If there is powder around the paddle, the
particles around the paddle block the rotation of the paddle, the motor body rotates around the spindle axis, the pin attached to the motor turns on the signal
micro switch, closes the motor micro switch, sends out a signal and stops rotating Electrical. When the granular material stops from the detected state and the
granular material is eliminated, the motor reverts to its original state by spring force over the position of the connecting pin, the motor returns to the micro
switch chromatographic action, and the paddle starts to rotate again. Unreasonable force is applied to the blade due to the flow phenomenon. Even if the
spindle is forced to rotate, the forced rotation of the spindle will slip due to the slip mechanism connected between the motor shaft and the spindle. The
forced rotation force is not transmitted to the motor shaft, but to the motor. . Protection damage.