NSK Bearing 16009 CE

09/10/2020

The status quo and development trend of China's gate valve market

Gate valves have the longest history of use, and are still used in various countries around the world, especially below DN300mm, which still dominate in various types of valves. The characteristic is that the pressure difference between the front and rear of the valve plate forces the valve plate to press on the valve seat on the right side of the outlet, with good sealing performance, and when the valve plate is fully opened, the pressure loss is small because the valve plate does not remain in the flow path. Used to cut off the medium in the pipeline.

08/14/2020

Factors affecting the boiling heat transfer of refrigerant liquid

In the evaporator, the heat of the cooled medium is transferred to the refrigerant through the heat transfer wall, so that the liquid refrigerant absorbs heat and vaporizes.

09/06/2020

Selection and verification of pressure vessel safety accessories

1 Pressure vessel and its safety accessories 　　 Pressure vessel is a closed device, not only carries a certain pressure, but usually contains gas or liquid inside, and metal and non-metal materials are common. There is a large pressure difference between the inside and outside

09/07/2020

The energy saving of air compressors starts with the gas tank and pipeline!

Energy saving principle 　　 After the compressed air is discharged from the compressor, it needs to be transported to the application place through the air tank and pipeline. In the field of use, there are problems with gas storage tanks and pipelines

08/09/2020

Causes and solutions of leakage in heating construction

In the heating construction process, leakage is a relatively common quality problem. Once leakage occurs, it will have a greater impact on people's normal production and life, and at the same time,

06/29/2020

Several causes of compressor burning

09/09/2020

What are the requirements of light industry for air compressors

The application industry of air compressors is very wide, which can be said to be all walks of life, but it is worth mentioning that different industries have different requirements for air compressors. Let's introduce the requirements of light industry for air compressors!

08/15/2020

The correct operation method of air-cooled refrigerator

For companies that use air-cooled refrigerators, the stable use of equipment is the most important thing, and if you don’t pay much attention during use, it will cause problems with the stability of the equipment due to some external factors.

09/06/2020

Design steps of two-wire AC current transmitter

Known high-current current transformers convert different currents into 0~5A alternating current for on-site display. For long-distance transmission, the current must be converted into a standard DC current signal of 4-20mA before transmission.

02/19/2024

Understanding and Resolving the Issue of Furnace Blowing Cold Air and Won't Shut off

Winters bring a sense of coziness as we rely on our furnaces to keep our homes warm and comfortable. However, discovering that your furnace is blowing cold air and refusing to shut off can be a cause for concern.