NSK Bearing 23252CAE4

08/08/2020

Detailed explanation of multi-line air conditioning installation 3 times 5 key 8 steps specification

Detailed explanation of multi-line air conditioning installation 3 times 5 key 8 steps specification It’s not an exaggeration to say that the central air conditioner is installed with 3 points and 7 points for quality.

07/04/2022

What is a Magnet Pump?

Magnet pumps are seal-less pumps that use the technology of a drive magnet and inner magnet connected to an impeller to move fluid through the pump.

08/20/2020

Precautions for the selection of fan coils for large central air conditioners

The fan coil unit is an important component in a large central air-conditioning system. Its selection will directly affect our usage, such as cooling effect, power consumption, noise impact, etc.

06/29/2020

Suggestions for troubleshooting of compressor with liquid start

07/24/2020

Analysis┃The function, selection and principle of air conditioning condensate lift pump

Analysis┃The function, selection and principle of air conditioning condensate lift pump At present, there are many brands in the central air-conditioning market. However, as to whether air-conditioning condensate water lift pumps and air-conditioning condensate lift pumps should be installed in air conditioners

09/22/2020

Discussion on Calculation Method of Surge Line of Rich Gas Compressor

1 Introduction The catalytic cracking rich gas compressor is a kind of compressor, which is very representative. For this reason, the catalytic cracking rich gas compressor is taken as an example to discuss the calculation method of the surge line of the rich gas compressor control system.

09/07/2020

The technical knowledge of these three types of screw air compressors must be mastered by sales engineers

Sales engineers need to understand the basic principles of air compressors. I believe that the company has given a brief introduction after joining, so I won’t repeat them. If you still don’t understand, you can consult books.

07/26/2022

What is A Vane Pump

A vane pump is a self-priming positive displacement pump providing constant flow at varying pressures. Operation is via a motor connected to a gearbox as typically the maximum rpm is 900.

10/20/2025

Basics of Servo Motor You Should Know

Servo control refers to the effective control of the position, speed and acceleration of certain object to meet a certain purpose. It is one of the most important control methods in modern industry.

06/30/2020

What happens if the refrigerant recovery time of the air-conditioning compressor is too long

What happens if the refrigerant recovery time of the air-conditioning compressor is too long At ordinary times, we will need to simply disassemble and assemble the compressor due to certain circumstances. However, if you do not pay attention to certain matters when disassembling, it will cause the compressor to be directly damaged, so you will not be able to compensate for it.