Omega Flowmeter FL-3651G

07/15/2020

What you need to know about Copeland compressors

The operation of Copeland Scroll compressor is directional. It can only rotate in one direction for compression. The specific direction of rotation depends on the phase force. If the scroll compressor rotates in reverse, it will cause insufficient lubrication of the system and cause scroll wear or damage to the scroll components.

02/27/2021

Working principle of servo motor (how servo motor works)

The rotor inside the servo motor is a permanent magnet. The U / V / W three-phase electricity controlled by the driver forms an electromagnetic field. The rotor rotates under the effect of this magnetic field. At the same time, the encoder of the motor feeds back the signal to the driver. The driver adjusts the rotation angle of the rotor according to the comparison between the feedback value and the target value. The accuracy of servo motor depends on the accuracy of encoder (number of lines).

08/15/2020

Summer chiller failure detection and solutions

The weather is getting hotter and hotter, and the industrial chillers of many factories ushered in the peak period of refrigeration. Frequent operation of refrigeration equipment is likely to have such and other small failures.

08/16/2020

Five major lubrication methods for compressors in industrial chillers

Everyone knows the principle of industrial chiller compressor. The compressor sucks the low-temperature and low-pressure refrigerant gas in the evaporator into the compressor, passes through the compressor,

08/08/2020

What is the most appropriate setting for the heating temperature of the central air conditioner

What is the most appropriate setting for the heating temperature of the central air conditioner Everyone knows that in the summer, the okmarts.com central air-conditioning temperature is set at 26 to 28 degrees Celsius,

06/14/2020

Causes and removal methods of frost in cold storage evaporator

The frost formation of the cold storage refrigeration evaporator should be comprehensively analyzed from various aspects. The design of the evaporator, the evaporator spacing between the fins, and the piping arrangement should be optimized as a whole. The器2䀀
ￜ皥
䖒皦즠Ʋ嫜ི㲈Ʋ
䌁皦
ᮔDž༬皧嫦ིЀ呄ᠾ鹨់༹皧
ࠄ
00령ꐱ댁珵뛐珵Љ
䕄ྦ￿￿뤂ᐱ뚜珵ᴴᏩ呄ᠾ퍘ᒥ鹨់ᩄꋔྦ
瑉浥巠皱㙲皦抐皱巠皱੨皦柘皱ￜ皥
ب巠皱㙲皦忈皱੨皦柘皱
즠Ʋǜ勁皦즠ƲبǜV /펔B䌁皦
ᮔDž'鱤džၜ먢䇨珵呈ᠾ뤂ᐱ⿇⬿먲僧

07/08/2020

Cold storage standard installation and commissioning strategy

Cold storage standard installation and commissioning strategy 1. Installation Specification of Cold Storage 　　 Enter the construction site, according to the construction drawings, verify the implementation of the work, determine the installation location of the equipment (storage body, drain door, evaporator, host, condenser, control system, etc.).

06/29/2020

Several causes of compressor burning

06/14/2020

Common failures of half-sealed piston compressors

Common failures of half-sealed piston compressors 1. The compressor cannot start normally 1. First check whether the power supply voltage is too low or the motor line is poorly connected. If the grid voltage is too low, start again after the grid volt器2䀀
ￜ皥
䖒皦즠Ʋ娼ི㲈Ʋ
䌁皦
ᮔDž༬皧婆ིЀ呄ᠾ鹨់༹皧
ࠄ
00령ꐱ댁珵뛐珵Љ
䕄ྦ￿￿뤂ᐱ뚜珵

09/03/2020

The advantages of the third eye of the air compressor are countless Take a look at remote monitoring.

As technology continues to improve and become more intelligent, manufacturing equipment can better monitor equipment performance and track regular maintenance through remote monitoring.