Repeatability: ±1% FS
Flow Measuring Range: 1.2 to 900 SCFM
Maximum Operating Pressure:
Aluminum and Brass Monitors: 40 bar (600 psig)
Stainless Steel Monitors: 70 bar (1000 psig) up to 116°C (240°F)
Maximum Operating Temperature: 116°C (240°F)
Note: For options “-HT” and “-UHT”, see high-temperature graph on spec sheet
Pressure Differential: See the pressure graphs on spec sheet.
Standard Calibration Fluids: Air @ 21°C (70°F), 1.0 sg and 6.8 bar (100 psig)
Relay (Optional): 1 or 2 form “C” relays, rated 10 A, 125 or 250 Vac or ¼ A, 250 Vdc
Mechanical Life: >106 cycles
Analog Output (Optional): Supply voltage 12 to 35 Vdc, field selectable for 0 to 5 Vdc (100 W minimum load), 0 to 2000 Hz square-wave pulse or 4 to 20 mA
Rmax = 50 (Vs - 12)
(Vs = supply voltage DC)
Installation Dimensions:
1/4 and 1/2 NPT Sizes: 1-7/8 OD x 6-9/16" length
3/4 and 1 NPT Sizes: 2-3/8 OD x 7-5/32" length
1-1/4 and 1-1/2 NPT Sizes: 3-1/2 OD x 10-1/8" length
Omega Flowmeter FLMG-34260
People who bought this item also viewed
YOKOGAWA Flowmeter AXFC-4-L015/CH
KES Level Meter CLT-1-B1-CC-350-150SL-1
KRK Turbidity Meter TR-502L
Customers frequently viewed
IWAYA DENKI Water Pump 25CJT0752
Panasonic Servo Motor MHMF022L1V2M
Honeywell Solenoid Valve VE4025B1045
ROTEN Mechanical Seal 8E5K-22-X
SANDSUN Overload Pump VA08H-760
GS Battery 6-QW-60(450)-(55D23L-KR)
Rechi Compressor 44R273A
MINDMAN Air Cylinder MCQV2-11-40-200
Mitsubishi Compressor YB645WTG
NACHI Vane Pump UVN-1A-0A4-0.7-4-11
Omron PLC C200HS-CPU21-EC
Copeland Compressor D8SJ2-600X-AWM/D
Eaton Vickers Vane Pump 45V-42A-1B22R
Recent related posts
-
08/20/2020
The general layout principle of the suction pipe in the cold storage
Recently, a small partner left a message asking about the general layout principles of the suction pipe in the cold storage. Today, the editor of okmarts.com will popularize this knowledge for everyone
-
03/01/2021
Matters needing attention
1.Oil and water protection of servo motor 1) The servo motor can be used in the place that will be attacked by water or oil drops, but it is not completely waterproof or oil-proof. Therefore, the servo motor should not be placed or used in the environment of water or oil invasion. 2) If the servo motor is connected to a reduction gear, the oil seal should be filled when using the servo motor to prevent the oil of the reduction gear from entering the servo motor 3) The cable of servo motor should not be immersed in oil or water.
-
02/14/2023
The Composition and Working Principle of Reduction Gearbox
Gearbox, also called reducer or gear reducer, is a widely applied reduction transmission mechanism equipment, composed of two or more gears.
-
09/22/2023
Water-Cooled Chiller vs Air-Cooled Chiller: Which One is Better?
When it comes to cooling systems for large commercial buildings or industrial facilities, two of the most common options are water-cooled chillers and air-cooled chillers. Both types of chillers are designed to remove heat from a building or industrial process, but they operate in different ways and have their own unique advantages and disadvantages.
-
09/09/2020
Industrial bearing knowledge
Structural features Bearing seat: The bearing seat is made of cast iron with heat sink on the surface. The mating surface of the bearing seat and the bearing bush is spherical. Bearing seats are divided into two types: insulated and non-insulated.
-
06/29/2020
Treatment of frost in crankcase when compressor head frost is serious
Treatment of frost in crankcase when compressor head frost is serious The frost on the cylinder head is caused by a large amount of wet steam or refrigerant sucked into the compressor. The main reasons for this situation are:
-
08/17/2020
What are the hidden dangers of improper central air conditioning installation
The peak holiday season has come to an end, and the baton is perfectly taken over during the peak work season. After a busy day, the most hope is to return to the comfortable home and get a good night’s sleep.
-
01/26/2022
New Type of Pneumatic Pressure Transmitters - Working Principle & Features
The new type of anti-vibration pneumatic pressure transmitter is used with the BOP (blowout preventer) and the throttle manifold control box for oil and petroleum products.
-
07/18/2020
Fault analysis and treatment of excessive oil consumption of the refrigeration compressor of piston chiller
Commonly used chillers are divided into piston type, screw type, centrifugal type, and vortex type chiller according to the type of refrigeration compressor used. Their evaporators and condensers generally use shell and tube heat exchangers, the throttling device uses thermal expansion valves, the refrigerant is freon
-
06/14/2020
The difference between single and twin screw compressors is reflected in the following 6 aspects
The difference between single and twin screw compressors is reflected in the following 6 aspects